Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: jetuaime81 on October 18, 2024, 06:52:19 AM
-
Hi people. I need a capacitor value and size which got knocked off while reflowing the pmic d92003mw.
-
https://ibb.co/h8ZMPLZ (https://ibb.co/h8ZMPLZ)
Or the same cap on jdm-040 https://ibb.co/f8t7tfR (https://ibb.co/f8t7tfR)
-
10uF, 0603
No idea on the voltage spec, just go on the hi side to be safe.
-
Thanks. I replaced that but it functions on battery and Bluetooth perfectly (with an issue) and when I connect USB cable to pc, the pc makes USB plugged in and then unplugged sound repeatedly.
The issue that I mentioned is, usually ds4 on plugging the battery, there is a startup cycle. It draws approx 40 to 50mA for about 2 seconds and then comes down to 0.1mA. This one is taking 80mA and then rests at 30mA (that's a 30mA leakage and hard to detect even via thermal can). I'm suspecting the mt3610n chip maybe faulty. I did try reflowing.
My question is are the jdm-050 and -055 mt3610s interchangeable?
-
I'm sorry RDC, I didn't check thoroughly it seems. I found a shorted capacitor near this pmic. Do you have the value for this? It's the same size 0603
On jdm-040 https://ibb.co/Bqkhnfn (https://ibb.co/Bqkhnfn)
On jdm-050 https://ibb.co/6g3PM4J (https://ibb.co/6g3PM4J)
-
Nvm, I just replaced with 10uf (just a guess) and the controller now works perfectly. Thanks ✌