Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: rixybix on February 07, 2025, 03:15:27 PM

Title: XBox One 1708 joystick axis won't center after replacing pot
Post by: rixybix on February 07, 2025, 03:15:27 PM

Hi there,

I've a 1708 controller whose left joystick is off horizontal center. I have replaced the horizontal axis pot, and then the entire joystick, but still cannot get the axis to center correctly. In fact, it seems to have gotten a little worse after my attempts. It seems the problem may be elsewhere on the board at this point. Is there a solution to this?

Thanks for reading!

Title: Re: XBox One 1708 joystick axis won't center after replacing pot
Post by: Para81szs on February 13, 2025, 11:49:04 AM

That's what I experienced too...the xbox controller problem after changing the stick 3 times with different models and it still does the same thing....I still haven't found the solution.https://www.youtube.com/shorts/DFb8nQFKxvc?si=reYXpWrOKY8CggyK (https://www.youtube.com/shorts/DFb8nQFKxvc?si=reYXpWrOKY8CggyK)