Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: Ortillson on July 20, 2026, 11:28:27 PM

Title: 1914 Stick replacement gone wrong
Post by: Ortillson on July 20, 2026, 11:28:27 PM

My controller had busted usb c port and drift on both sticks so i decided to replace them.Probably i messed it even more because i lifted some pads and they are not working properly.
Voltage one each pot is 0.4V
Residue on pot legs is from q-tips
Video of how controller behaves:
https://drive.google.com/file/d/1LELRfzUBIUZjZ50FtK7YTHcexql0jJgq/view
(https://i.postimg.cc/B8n5wZN4/leftstick1914.jpg) (https://postimg.cc/B8n5wZN4)(https://i.postimg.cc/jnPyJDqw/rightstick1914.jpg) (https://postimg.cc/jnPyJDqw)

Title: Re: 1914 Stick replacement gone wrong
Post by: Ortillson on October 18, 2026, 07:00:20 AM

I desoldered pots and there are shorted pins on pcb(marked by red dots)
Any ideas?
(https://i.postimg.cc/FYDcrtrR/1914-shorted.jpg) (https://postimg.cc/FYDcrtrR)

Title: Re: 1914 Stick replacement gone wrong
Post by: RDC on October 19, 2026, 07:54:09 AM

Half of those marked spots are ground, the other half are the AN+ rail (power for the sticks), so if those are indeed shorted, the first thing I'd suspect is you have some solder or damage on one of the AN+ spots that is causing it to touch the ground plane. After that you're getting into the AN+ Regulator being bad.