Recent Posts

• No Foul Language. No Mod-Off entrant Talk. No Spamming. Just good ol' General Chit Chat. For Modding Help Make A Post.
• Jack lo svelto: Hi guys, I need your help. My JDM 055 has extreme right drift. That is, it remains fixed to the right without trembling, motionless. under the microscope I noticed the lack of capacitors c23 and c24. They may be the cause. I saw that they are connected to the headphone jack input. Can you tell me their value? Thank you.
  January 27, 2025, 02:17:15 PM
• COD3-BRKR: Is this site dead?
  January 23, 2025, 07:18:38 AM
• Monk3y: Been about 15 years fellas, needing some help in the PS3 forum if anyone active can lend a hand.
  January 07, 2025, 04:47:31 PM
• shoulders: @hurricanemaiden - Did you install hall sensors?
  January 03, 2025, 10:41:42 AM
• FOOKz™: boom
  December 29, 2024, 11:37:11 PM
• hurricanemaiden: i have a xb1 slim controller, when i press the left trigger, the left analog stick moves
  December 21, 2024, 02:10:58 PM
• hurricanemaiden: hi can someone help me ?
  December 21, 2024, 02:10:15 PM
• Portu40: hi
  November 20, 2024, 02:14:08 PM
• sinrockets: Hello world
  June 13, 2024, 02:47:23 AM
• spartanking: alguien me puede compartr la comparacion de un ssd de xbox serie x,tengo uno que el ic de power  tiene un capacitor aterrisado y quiero saber si es normal o hay corto
  February 06, 2024, 07:13:58 PM
• Bmhalleffect: Hello world
  February 01, 2024, 07:21:10 AM
• Atof1808: Xbox analogs sticks s ans
  January 09, 2024, 02:06:13 PM
• GhoSt: Have a great 2024 lads.
  December 31, 2023, 08:55:51 PM
• crazy-modder: Did someone say OG?
  December 17, 2023, 09:43:07 PM
• ViSioNXx: I don't consider myself an og persay... but definitely an alumni
  December 12, 2023, 01:05:25 AM
• Rodent: Meant OGs
  December 06, 2023, 06:28:50 AM
• ViSioNXx: Lol barely
  December 05, 2023, 11:56:02 PM
• Rodent: Wow some Lags still alive
  December 05, 2023, 11:27:57 PM
• ViSioNXx: Hmmm...
  December 05, 2023, 07:48:49 PM
• y0ush4: Sir may I ask …How much time it need to approve the new thread
  September 12, 2023, 01:14:39 AM
• Bonz: well then, I'm excited to see this site still up.  may have to put my PSPi build log here
  August 30, 2023, 05:04:54 PM
• moniblee: Rdc
  June 02, 2023, 03:07:36 AM
• laxboy: Hello
  May 29, 2023, 12:12:47 PM
• jrfhoutx: My nostalgia is happy to see this site is still up
  May 10, 2023, 10:50:22 AM
• Rythion: Yo acidmods family! Wanted to know if anyone still has any XCM mods stuff still from back in the day? I will be willing to buy.
  May 05, 2023, 02:31:48 PM

31

PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans

« Last post by ZhenyaKa on April 07, 2025, 01:36:10 PM »

Hello!
Our patient BDM-010

Some times ago I've restore lost resitor for reset PULL-UP. And gamepad was repaired

Gamepad works fine a couple years.

Now I've installed hallsensor stick at left and gamepad randomly powered on or not at all

It doesn't turn on more often than it turns on.

Is any point near SIE (CPU) where I can test RESET line from reset button?

At upllup resistor I have 1.8V, at other side of it 0.8V

32

PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans

« Last post by RDC on April 06, 2025, 06:31:21 PM »

Only 2 connectors on the board that size, and only one of them has anything to do with the R1 button. Also, that image was flipped as I did it top down thru the layers, it's fixed now.

33

PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans

« Last post by Para81szs on April 06, 2025, 01:40:01 PM »

Where exactly is it because I can't figure out the position?

34

PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans

« Last post by Para81szs on April 06, 2025, 01:38:30 PM »

@kumpll2007  Your problem is also with the mouths because from what I can see they are a little damaged, especially the lower ones, there is definitely something wrong.

35

PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans

« Last post by RDC on April 05, 2025, 04:12:33 PM »

Missing part is just a capacitor, that's not needed and isn't causing the issue.

Stuck up/left either both axis lines are shorted to ground, or pulled the plating out of the holes for the voltage to the POTs or pulled the plating out of the holes for the axis.

36

PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans

« Last post by kumpll2007 on April 04, 2025, 11:21:08 AM »

Hello everyone! After replacing the left stick, it got stuck in the upper left position.


I noticed that some element is missing here, where I highlighted in red. What is this element?


Now, even when I unsoldered the stick, it still stays in the upper left position. Please tell me what I broke.

37

PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans

« Last post by RDC on April 02, 2025, 03:00:33 PM »

Not much to the R1 trace on that board. Connector, via, cap, short trace on an internal layer, another via then right to the MCU. Either the cap is shorted, the trace is shorted somewhere along the line (under the connector could be a possibility), or the MCU has an issue.

38

PS4 Controllers/PS4 Rapid Fire Controllers / Re: R1 Dualsense model BDM-010 is activating alone

« Last post by Para81szs on April 02, 2025, 11:06:27 AM »

I have this problem too with an BDM-020 board with R1 pressed continuously, I connected the board + battery and nothing else and it's still pressed

39

PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans

« Last post by Para81szs on March 31, 2025, 11:14:34 PM »

I put a capacitor similar to the rest but it still blocks R1, does anyone know where else I need to check because I can't find a diagram?

40

PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans

« Last post by Para81szs on March 30, 2025, 06:40:28 AM »

Hello, I have a BDM-020 board where I am missing a part...does anyone know what its value is? or what exactly is it that my R1 button is on?