Author Topic: HELP!!!  (Read 1900 times)

Offline dreamer01

  • Ω Allumnist Ω
  • *
  • Posts: 106
  • Post quality +0/-0
  • Gender: Male
  • my life is a sorrow death... ehh i'll get over it
HELP!!!
« on: January 27, 2008, 01:28:47 AM »
help me!!! my psp slim screw (the bottom one) has somehow broke or smashed or whatever (the place where the screwdriver goto has become a round shape instead of a phillip). what should i do!!! now i can't open the psp no more!!! WUAAA!!! (i just realized the thing a few minutes ago as i was trying to open it...)


cubey!

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
Re: HELP!!!
« Reply #1 on: January 27, 2008, 03:00:08 AM »
you must of worn out the screw, there are other methods such as drilling the head screw with a drill to completely demolish the head screw and nothing is left, or maybe screw extractors?

Offline dreamer01

  • Ω Allumnist Ω
  • *
  • Posts: 106
  • Post quality +0/-0
  • Gender: Male
  • my life is a sorrow death... ehh i'll get over it
Re: HELP!!!
« Reply #2 on: January 27, 2008, 05:51:48 PM »
what's a screw extractor? soldering iron... i guess that would work, but just in case, i need a backup faceplate :p :winker:
« Last Edit: January 27, 2008, 06:14:03 PM by dreamer01 »


cubey!

Offline teepee

  • Motor Mouth
  • *
  • Posts: 92
  • Post quality +0/-0
  • Gender: Male
Re: HELP!!!
« Reply #3 on: January 27, 2008, 08:20:00 PM »
you can get a screw extracter from sears. it fits in a drill or socket driver and looks like a short drill bit.

Offline cobain93

  • Fart Sniffer
  • *
  • Posts: 43
  • Post quality +0/-0
Re: HELP!!!
« Reply #4 on: February 04, 2008, 03:47:44 PM »
i did the same thing, what i did to get the screw out was first i took a VERY sharp razor knife aand cut around the screw and took of the plastic surounding the screw, then i took needle nose plyers and basically twisted it off with that.  :yess:

Offline Lazyface

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 60
  • Post quality +0/-0
  • Gender: Male
Re: HELP!!!
« Reply #5 on: February 04, 2008, 04:33:03 PM »
i just took a dremel and cut one long line in the screw and then used a flat head to get it out. trust me it works

Offline cobain93

  • Fart Sniffer
  • *
  • Posts: 43
  • Post quality +0/-0
Re: HELP!!!
« Reply #6 on: February 04, 2008, 06:25:20 PM »
i just took a dremel and cut one long line in the screw and then used a flat head to get it out. trust me it works

good idea, wish i had thought of that b4 i took out a chunk of the trimming on the bottom of my slim..... (not to mention its a darth vader slim)

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal