Author Topic: HELP!!! plz read  (Read 1893 times)

Offline duhitsthomas

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
HELP!!! plz read
« on: July 18, 2008, 09:47:56 PM »
i just switch cases on my psp went from normal piano black, now ive got a red one full shell mod everything went smooth except now my R button is stuck its not even the trigger stcuk down its just acting like it is when ipower on my psp it goes straight to the recovery menu i can exit out and it boot up fine but when i try to play a game w/e the R button does keeps happening over and over again.

any ideas?

Offline treemty

  • l,,l METAL l,,l
  • Millennium Poster
  • *
  • Posts: 1231
  • Post quality +1/-0
  • Gender: Male
  • Will mod for food
    • the1337group.com
Re: HELP!!! plz read
« Reply #1 on: July 18, 2008, 10:27:10 PM »
try taking off the faceplate, then pulling out the triggers and putting them back in, that happened to me once.

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: HELP!!! plz read
« Reply #2 on: July 18, 2008, 10:33:13 PM »
i just switch cases on my psp went from normal piano black, now ive got a red one full shell mod everything went smooth except now my R button is stuck its not even the trigger stcuk down its just acting like it is when ipower on my psp it goes straight to the recovery menu i can exit out and it boot up fine but when i try to play a game w/e the R button does keeps happening over and over again.

any ideas?

You could check the ribbon cable it might be loose but I've heard some other people have fixed this just by pressing on it 30 times or so quickly. You could try it.  :dntknw:

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: HELP!!! plz read
« Reply #3 on: July 19, 2008, 08:30:38 AM »
also, check the trigger pad. may have not been placed right. it fine to place the fpcb correctly but if the rubber pad and the small metal frame isn't then this problem will accure.

VoX

  • Guest
Re: HELP!!! plz read
« Reply #4 on: July 19, 2008, 08:35:17 AM »
You will need to either do a ghetto fix, or replace the connector its self

Offline duhitsthomas

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
Re: HELP!!! plz read
« Reply #5 on: July 19, 2008, 11:27:49 AM »
also, check the trigger pad. may have not been placed right. it fine to place the fpcb correctly but if the rubber pad and the small metal frame isn't then this problem will accure.

i don't think thats it i took off the faceplate and the trigger just leaving the button bare and it still acted like i was holding it down

Offline duhitsthomas

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
Re: HELP!!! plz read
« Reply #6 on: July 19, 2008, 11:33:11 AM »
You will need to either do a ghetto fix, or replace the connector its self

what kind of ghetto fix would work also where could i find a new connector
« Last Edit: July 19, 2008, 11:35:05 AM by duhitsthomas »

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: HELP!!! plz read
« Reply #7 on: July 19, 2008, 11:37:39 AM »
Try not to double post use the edit button-

Probly buy a new Flex cable.

DX has them or look in auction section

Offline Bhawan

  • E = MC²
  • *
  • Posts: 336
  • Post quality +2/-0
  • Gender: Male
Re: HELP!!! plz read
« Reply #8 on: July 19, 2008, 12:09:04 PM »
or just openit up again and check the silicon rubber thing, sometimes it gets stuck ......

thanks chase for this sig =)
I miss my dragon lol....

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal