Fitting the nub :help: plz

[ReZiN_420]

So I already have the razor wired and working, I want to know how to FIT it into my slim. Not how to use it or anything like that, just how to fit it into or under the faceplate. Thank you for any help to any1 with it.

[Tri-edge]

you didn't tell me in your pm that it was a slim psp that you were doing...
that sort-of changes things.  Have you tried shaving down the insides of the faceplate and removing the power plug? I think it should fit if you do both.

[ReZiN_420]

Well im kinda talking to anthonyta(pretty nice guy) and he said I had to remove this also....

Without that my psp wont function properly....will it? and then I lose the power source for the leds in my triggers and in my UMD door. Call me crazy but im 95% sure that port and ribbon that goes to it are needed....right? As for your question yes, I have removed the power plug, have usb charge mod done, and shaved off that faceplate screw post and some of what held the power plug in place, and now aparently have to do an alternative power switch mod. But after doing all this I quickly relized this still did NOT give enough room for an internal second nub. What do you think that's_what_she_said? or well anyone else?!
I am a little slow to catch on but on the most part, can put 2 and 2 together, so bear with me.

[PspKicks316]

Without that my psp wont function properly....will it?

Do NOT get rid of that...You need that. Why the did he tell you to get rid of that?!?!?!?!?!

[kink192]

thats the power board dude, thats what gets power to everything basically. without that youve got . there were some people using washers and rubber bands from braces a while ago. see if you can find that thread, they made it fit underneath everything

[anthonyta]

?? didn't nico take out the whole power board and just made and alternative power switch? thats what i read and saw so thats what i told this dude

[kink192]

its not just the powerswitch, on the powerboard is the x [] ^ and o buttons, so even if you did it would be poo, the razor wouldnt be attached to anything, link me to the thread your talking about please

[ReZiN_420]

OK, so after relizing I might not have recieved the best info.(it's cool, other people quickly helped so no harm done) I think what made the best sence is to do the ultra thin razor x set up with rubber bands and squeeze it under the power board and everything else(basicly the faceplate) Although I wanted to have it some what like Nico's psp(https://www.acidmods.com/forum/index.php?topic=12655.0) I've set up my joystick the same way he has it in his video


But unlike him cant seem to fit it where he has it, due to the power board being totally in the way.....am I just doing it wrong?

[Tri-edge]

Just so you know I needed to remove the Power Plug and the Power Board. The PSP turns on with the reed switch. This is a Razor nub fully under the faceplate.

maybe anthonyta was right, you do need to remove the powerboard

[PspKicks316]

You can't remove the powerboard...or you're gonna be playing on a paperweight o_O

[Tri-edge]

don't look at me I'm not the one who said it. try asking Nico how he did it, maybe he will tell you.

[l0rdnic0]

OK so yes you need to remove the power board, the charge plug and the plastic that holds the lower portion of the powerboard.

You know how to do the USB charge mod on the Phat? Do it to your slim this way you can charge you PSP when it’s turned off.

Also now that you have removed your power board you will need to get a reed switch and do the magnet mod, or relocate a push button switch and or wire the power to a face button (but I haven't done that so I can't tell you how).

Hey also looking at your picture of the razor.. You know that nub that sticks out of the bottom of the circuit. You need to sand that flush so that it does not stick past the circuit board

[anthonyta]

on that little connector thing that you soldered your second nub to. one of the pins is the power switch another ground and a hold. do this mod that i did to a phat psp using those points. simple dude. good luck

https://www.acidmods.com/forum/index.php?topic=17803.0