Author Topic: Nikocronaldo's Mod PSP  (Read 1136 times)

Offline nikocronaldo

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
Nikocronaldo's Mod PSP
« on: October 26, 2008, 10:09:17 AM »
I'm goint to show you my moded PSP. it has 7 LEDs, 5 are blue and 2 are white. It also has a crystal clear faceplate and back.

I hope you like it:

http://youtube.com/watch?v=XHAAI38hXNg



Excuse my bad english.

GhoSt_Death: Please link your youtube vids using the button
« Last Edit: October 26, 2008, 12:30:30 PM by GhoSt_Death »

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: Nikocronaldo's Mod PSP
« Reply #1 on: October 26, 2008, 01:43:22 PM »
Its ok

Would look better if there wasn't just 6 leds in the UMD Door randomly and one random led on the side...

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Nikocronaldo's Mod PSP
« Reply #2 on: October 27, 2008, 08:15:42 AM »
it's a good job, but i tend to agree with jumbo. Try and place the leds around the umd ring for example. it would look alot better and cleaner. if you need help with how to place them, myself and the rest of the modders here will be happy to help. :)

Offline Alien_X

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1010
  • Post quality +3/-0
  • Gender: Male
Re: Nikocronaldo's Mod PSP
« Reply #3 on: October 27, 2008, 10:32:23 AM »
Its ok

Would look better if there wasn't just 6 leds in the UMD Door randomly and one random led on the side...

All I Can say is that it is better than your first mod [insert ellipsis here]

That is an awesome job! You did really well at pulling it off!
Was this your first time with a soldering iron?

Sigs by Alien_X
www.ax-elec.com

Offline nikocronaldo

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
Re: Nikocronaldo's Mod PSP
« Reply #4 on: October 27, 2008, 03:12:45 PM »
it's a good job, but i tend to agree with jumbo. Try and place the leds around the umd ring for example. it would look alot better and cleaner. if you need help with how to place them, myself and the rest of the modders here will be happy to help. :)

Ok, I'll try that.

All I Can say is that it is better than your first mod [insert ellipsis here]

That is an awesome job! You did really well at pulling it off!
Was this your first time with a soldering iron?

Before I had R1 and L1 Triggers with 2 LED's SMD 0603. That's the first time with a soldering iron.
After I bought an Ayoue soldering iron with 0,5 mm and I made this mod.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal