HELP: SD mod

[j.s2ghetto]

okay i am doing a sd mod but its not the same as usual i am using the cr-5400
so far i remaped the ms pinouts to the back of the psp slim in the umd area



then i opened up the cr-5400 and wired it up to the pinouts turned on my psp slim and all i got was a blinking ms led
i added the sd slot and put in a 1gb sd card and same just blinks
can anyone help me out to figure out the prob or draw me up some diagrams on how to do it cuz i am stuck

THANKS

[anthonyta]

i pretty sure the blinking happens when you've wired up your ms adapter to the mobo the wrong way around where your 10 should be 1 and 1 should be 10 etc. either that or your adapter doesn't work. when this happened to me it worked when i switch it around but it was laggy then it started doing the blinking anyway. so i got a new adapter and now im lag free and happy =]

[j.s2ghetto]

THANK u so much i will order another one from dx soon
but another question when u take off the ms slot on the mobo wat are the 2 pinouts on the mobo that hold the ms slot together

I am going to try rewiring it see if that helps THANKS AGIAN 

[j.s2ghetto]

I GOT IT TO WORK WOOOOOOOOO
all i need now is my 2 16gb sd cards and i will be so happy lol i think i am getting them for christmas i am going to finish this up and post up some pics as soon as i do 

[anthonyta]

so.. you just wired it up the wrong way around?

[j.s2ghetto]

yes i re did it and it works perfectly i also just got a 8gb sdhc card to use and i have a 1gb sd card so i can use this mod will i wait to get money to buy 2 16gb sdhc cards