Author Topic: 191k resistors for sound mod  (Read 1929 times)

Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
191k resistors for sound mod
« on: January 11, 2009, 10:43:38 AM »
Does it have to be 191k? Cant it be 180k? or 200k? Since 191ks, cant seem to find them in this country, so Id have to get it imported (£10, for 1 resistor... gotta be kidding me)

Plus with tolarence, its gonna be around the 200k/180k mark anyway, right?


Hoi! Pinoy ako!

Offline rceckspurt13

  • Acid Modder
  • *
  • Posts: 637
  • Post quality +2/-0
  • Gender: Male
Re: 191k resistors for sound mod
« Reply #1 on: January 11, 2009, 11:29:13 AM »
Youncan combine other resistors to = 191. For example: 100k + 90 + 1.
Any Questions? Please Contact Me: rceckspurt13@gmail.com

Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
Re: 191k resistors for sound mod
« Reply #2 on: January 11, 2009, 01:04:31 PM »
Youncan combine other resistors to = 191. For example: 100k + 90 + 1.
UK they dont sell 90ks either

Plus I am using SMD resistors, since I make the LM386 fit in thin heatshrink (0603 resistors and SMD LM386 manages to fit in 6mm heatshrink


Hoi! Pinoy ako!

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: 191k resistors for sound mod
« Reply #3 on: January 11, 2009, 03:24:42 PM »
mate, go to maplin (if theres one in your town or go to there website) and get a 180k resistor. they do work with the Im386. if you wanted, you could get a 10k + 1k from there as well to bring it to 191k.

Offline LaCozTe-2028

  • BANNED
  • E = MC²
  • *
  • Posts: 353
  • Post quality +0/-0
  • Gender: Male
  • I love My Lacoste shirts
Re: 191k resistors for sound mod
« Reply #4 on: January 11, 2009, 04:26:12 PM »
i use 187k-ohm and they work fine

try droping it again
my retared friend fixed by droping it
 1Sniper- not to be an :censored: but, its special friend

Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
Re: 191k resistors for sound mod
« Reply #5 on: January 11, 2009, 11:37:15 PM »
mate, go to maplin (if theres one in your town or go to there website) and get a 180k resistor. they do work with the Im386. if you wanted, you could get a 10k + 1k from there as well to bring it to 191k.
I got some 180K SMD resistors which I was planning to use, and Since I want to make it small as possible, will it be fine?


Hoi! Pinoy ako!

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: 191k resistors for sound mod
« Reply #6 on: January 12, 2009, 02:40:45 AM »
I got some 180K SMD resistors which I was planning to use, and Since I want to make it small as possible, will it be fine?

I don't see any reason why it shouldn't. 180K smd resistor would be fine to use :)

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: 191k resistors for sound mod
« Reply #7 on: January 12, 2009, 01:49:35 PM »
try not to use a resistor higher then 191K ;)
it makes the leds less reactive ;)

you are better of using a 180K resistor then (for example) a 193K



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal