Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Total Members Voted: 30
I now this is an old thread and it is bad to bump it but i mustI need to know how u did it to make it for both to work with just a switch cuz i have the coolest idea that will save everyone money and space in there slim (probably)okay here i go wat if we take one of these:http://www.dealextreme.com/details.dx/sku.16489and like the original sd mod take it apart and turn the micro sd slots into SD slots sound better than this http://www.dealextreme.com/details.dx/sku.17296 and cheaper Now if u can plz let me know i would really apreciate it i want to buy the supplys for this but i don't if i can't do it right
Robin I r sorrieez.
Ya but i want to try this and on the headlines for them on am they both say 32gb max PhotoFast CR-3100 Dual-Slot SDHC SD to MS Pro Duo Adapter/Converter for PSP 2000 (32GB Max)PhotoFast CR-5400 Dual-Slot SDHC MicroSD/TF to MS Pro Duo Adapter (32GB Max)and i don't need anymore then 16gb anyways
actually take a look at this topic and it will tell you all you need to knowhttps://www.acidmods.com/forum/index.php?topic=14584.0
because you can't just hook up a sd slot to a ms pro duo slot without an adaptor.
Don't bump old topics but since u already did might as well help u look at this linkhttp://pinouts.ru/Memory/sdcard_pinout.shtmland this one http://www.interfacebus.com/MicroSD_Card_Pinout.htmlnow wat u want to do is find out wat pin is #1 on ur ms to micro SD converteronce u know that connect the pins accordingMicroSD-->SDHC1-->92-->13-->24-->45-->56-->3+67-->78-->8hope that helps
nope u have to use a microSD to MS adapter thats the only way but u could take the ms slot off and put ur new SDHC slot there
So in other words there's just has to be a microSD to MS conversion chip so you can use the big SD cards. I would just personally get a CR-3100 and be done with it, but that's just me. So if you wanted to remove your OEM MS slot and fit a SD slot:1> Unsolder the MS slot2> Solder wires from your mobo's MS pins to the MS to microsd adapter3> Solder wires from the microsd adapter to your SD slot4> Lay down your SD slot and secure it in place. 5> Cut case to fit new SD card slot6> Shove a big SD card in there and pray it worksTri-edge cleared some things up with your post
Yeah just using Autocad for the drawings. But now that I'm thinking about it, I dunno if its a good idea to do this mod since you will probably cap out at 16GB using the single SD card? Cuz I don't think you can use a 32GB card with this setup. I guess if you want more storage u can probably get a PhotoFast CR-5400, crack it open and wire up 2 SDHC sockets and try and fit them inside.
1> Unsolder the MS slot2> Solder wires from your mobo's MS pins to the MS to microsd adapter3> Solder wires from the microsd adapter to your SD slot4> Lay down your SD slot and secure it in place. 5> Cut case to fit new SD card slot6> Shove a big SD card in there and pray it works