Author Topic: LED Stereo Sound Mod + VU Meter question - Phat 1000  (Read 2213 times)

Offline Desert Fox™

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Acidmods User
LED Stereo Sound Mod + VU Meter question - Phat 1000
« on: April 27, 2009, 02:11:44 PM »
Hello everyone, before I start, I have done this:

searched "vu meter" and "sound mod" neither have shown what I wanted

Second, I know this is mainly specifically for phats (fat) but I wanted a more general audience to see this thread.

Ok now, I was following the stereo LED mod using two LM386 amp's. I see that both support separate LEDs on either of the amp's, so I was thinking of setting up Hawk's vu meter (https://www.acidmods.com/forum/index.php?topic=29983.0) to one of the amp's (possibly the right speaker). This is a rough modified diagram with the addition of the vu meter (LEDs excluded in the picture).



Basically I would like to know if this is a correct setup, or if I need to add/subtract a few things to get this working properly. I'm sorry if it is obvious but I do not have sufficient knowledge to make educated guesses, which is why I'm asking.

Thanks
Fox

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal