Author Topic: DarkShot's Latest (Read 4864 times)

DarkShot · « **on:** May 25, 2009, 07:23:01 PM »

The latest personal PSP I've modded

List:
-Case Swap
-Blue power and Charge
-Blue mem stick and Wifi
-Wifi switch activated fading Triggers & bottom diy clear strip (Blue)
-Internal Go!Cam w/ switch on top for USB Connection

DarkShot's Blue-White PSP

In terms of the actual way the Clear bottom strip was done, I believe I'm the only one to replicate what anthonyta did on his PSP and post.

Comments?

Questions?

EliteGamer83 · « **Reply #1 on:** May 25, 2009, 07:29:52 PM »

I want to see how you mounted that extra switch on top :-\ lol thats bugging me so bad I want to know where you exactly put it.

Also whats the extra small hole next to the cam for?

Great PSP though love it.

DarkShot · « **Reply #2 on:** May 25, 2009, 07:40:51 PM »

If I crack it open later or dig my spare case I'll snap a couple pics.

That extra little hole is for the mic on the cam.

But on the opposite side of the wifi switch theres a spot where a nice small switch will fit, which is where mine is.

I had to cut away a bit of plastic, but it works quite well.

EliteGamer83 · « **Reply #3 on:** May 25, 2009, 07:47:46 PM »

Okay cool thanks.

bustinthejustin · « **Reply #4 on:** May 25, 2009, 08:08:43 PM »

Looks awesome! What switch did you get? link?

EliteGamer83 · « **Reply #5 on:** May 25, 2009, 08:19:21 PM »

I'm just gonna guess it's the one from sparkfun, thats what alot of people use.

anthonyta · « **Reply #6 on:** May 25, 2009, 09:07:25 PM »

nice

bustinthejustin · « **Reply #7 on:** May 25, 2009, 09:29:51 PM »

Oh yeah, the clear strip still baffles me.... Could you show a picture of the inside of the UMD door, and the bottom with the UMD door off, if possible?

Sanctus · « **Reply #8 on:** May 25, 2009, 09:51:14 PM »

nice! there's so many blue and white psps these days xD including mine lol. I guess its because it looks so dam sexy and your psp is deffinately no exception

DarkShot · « **Reply #9 on:** May 26, 2009, 04:11:50 AM »

Thanks guys.

The switch I used was from a dollar store toy, the same one that I got the fading chip out of.

If all else fails, go to the dollar store.

pics to help yous:

Elite: Heres the spot I put the switch just trimmed down, was longer:

<snip>

On your own for the strip now.

And heres that switch:

robin1989 · « **Reply #10 on:** May 26, 2009, 06:04:48 AM »

very nice darkshot looking good

atomicareprise · « **Reply #11 on:** May 28, 2009, 07:36:39 PM »

nice work buddy...

can you show a pic of how you mount your fading chip install...

thanks...

DarkShot · « **Reply #12 on:** May 29, 2009, 04:40:45 AM »

Thanks.

I can't right now, but I can tell you that the chip is underneath the mem stick slot, closer to the mouth of the slot.

I put it there because of where I wanted to put the camera.

l0rdnic0 · « **Reply #13 on:** May 29, 2009, 06:10:48 PM »

Slick good job!!

atomicareprise · « **Reply #14 on:** May 30, 2009, 05:15:54 AM »

your chip comes from a toy right?

how did you hook the chip to the power source..

you use resistors right??

i have some chips here but i don't know how to convert them to run on 3.6v or 5v

DarkShot · « **Reply #15 on:** May 30, 2009, 10:06:57 AM »

Yes, it's from a toy.

I used a 47ohm resistor for the voltage source, because mine ran off of about 3.6 - 3.9 volts.

Easiest thing to do when you want to find out the value of resistors you need is by using ohm's law:

R = V/I

R is resistance, V is voltage, and I is current. The current from a PSP is 20mA, or 0.02A.

To find the Voltage to use in the equation, you take the forward voltage that the item operates from (Vf), and subtract it from the source voltage (Vs): 5 - 3.6 = 1.4

So V would equal 1.4. The equation as a whole is this:

R = (Vs - Vf) / I with numbers: R = (5 - 3.6) / .02

Therefor R would equal 70ohms. If you cant find that exact value, than use the closest value to that.

atomicareprise · « **Reply #16 on:** May 30, 2009, 10:27:49 PM »

my chip is operated with cell battery (the flat round one..)

can i convert that to 3.5V

can you show me the toy where did you get that chip buddy...

thanks..

DarkShot · « **Reply #17 on:** May 30, 2009, 10:34:09 PM »

I would, but I currently don't have one.

If however I get another one soon, I'll snap a pic for you.

atomicareprise · « **Reply #18 on:** May 31, 2009, 01:05:58 PM »

thanks buddy..

scorpion · « **Reply #19 on:** June 03, 2009, 09:20:37 AM »

what case is that? ive seen it alot and it looks so damn sexy, i want one!

EliteGamer83 · « **Reply #20 on:** June 03, 2009, 11:23:04 AM »

Quote from: scorpion on June 03, 2009, 09:20:37 AM

what case is that? ive seen it alot and it looks so damn sexy, i want one!

It's Custom.

DarkShot · « **Reply #21 on:** June 03, 2009, 11:30:58 AM »

It's an aftermarket full white case, with blue aftermarket triggers and ring on the back, and OEM buttons and trim from the Madden bundle PSP

EliteGamer83 · « **Reply #22 on:** June 03, 2009, 04:11:48 PM »

Hey where did you buy those blue LEDs?

RoBot1ks · « **Reply #23 on:** June 03, 2009, 04:54:27 PM »

That is great dude. nice job

It makes me wish I could have finished mine for the mod off

DarkShot · « **Reply #24 on:** June 03, 2009, 06:21:32 PM »

Quote from: EliteGamer83 on June 03, 2009, 04:11:48 PM

Hey where did you buy those blue LEDs?

Shop4LEDs, an ebay store.

They got good prices, and free shipping for the SMD LEDs or other small packages.

EliteGamer83 · « **Reply #25 on:** June 03, 2009, 06:33:12 PM »

Oh I am glad you did not say Unique-Leds... lol sorry I mean the PSP is great but I personally dont like that shade of blue.

News:

Author Topic: DarkShot's Latest (Read 4864 times)