« previous next »
Pages: [1]   Go Down

Author Topic: help..other 5v supply (lordnico's tut)  (Read 1925 times)

Offline miah23sky

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
help..other 5v supply (lordnico's tut)
« on: March 16, 2009, 01:24:08 AM »
 :help: hey guys..can you pls point me to other 5v supply to connect my +wire from the lm386..im following lordnico's tut and for sure that is a great tut but im not that good at soldering and the 5v supply to solder to is pretty small,,pls help this is the last step to finish my mod..pls pls pls.... :beg:
Logged

Offline Friguletz

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: help..other 5v supply (lordnico's tut)
« Reply #1 on: August 06, 2009, 03:20:54 AM »
help us pls! :|
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: help..other 5v supply (lordnico's tut)
« Reply #2 on: August 06, 2009, 11:43:07 AM »
there isn't an easier point as far as i know...
Logged

Sig by Kenshinffx - Thanks!

Offline Friguletz

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: help..other 5v supply (lordnico's tut)
« Reply #3 on: August 06, 2009, 01:28:26 PM »
if i removed the rezistor from the +5v will i still get voltage for the mod ? :| :beg:
Logged

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: help..other 5v supply (lordnico's tut)
« Reply #4 on: August 06, 2009, 01:45:29 PM »
Ya but you would need it there to have the Memory LEd still work.
Logged

Offline Friguletz

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: help..other 5v supply (lordnico's tut)
« Reply #5 on: August 07, 2009, 04:23:30 AM »
and if the led dosent work that means that my mod is dead ?
Logged

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: help..other 5v supply (lordnico's tut)
« Reply #6 on: August 08, 2009, 01:59:40 AM »
Well it depends. As long as the wire is soldered to the 5v point it will work. As for the memory led, you can always bridge (solder over) the resistor to get it working, but it will be very bright.

Guys I know it's a really small point but it's the only one that you'll find to be the easiest to solder. Other points are on the Zif connectors and are an absolute pain to solder too if your not confident doing so. I'd also recommend using flux when soldering to that 5v point. It will make the job alot easier for you.
Logged

Offline ryan

  • ½ Pint
  • *
  • Posts: 35
  • Post quality +0/-0
  • Gender: Male
  • someday ill mod porsches, for now, PSP's
Re: help..other 5v supply (lordnico's tut)
« Reply #7 on: August 08, 2009, 10:58:34 AM »
Hey I think you can solder right to where the battery connects to the mother board.  If you are looking at the battery terminal it has three connections on the top and on the bottom and im pretty sure the one on the top all the way to the right is 5v.
Logged

Offline Friguletz

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: help..other 5v supply (lordnico's tut)
« Reply #8 on: August 08, 2009, 02:17:51 PM »
ok.. so let my think... now my rezistor from the +5v is removed... so if i put solder over the 2 contact the led will be ok.. but mutch brighter(the memory).. and if i solder the wire to the point where i soldered the +5v will my mod work ? is there any chance that the mod will not work ?


sorry for my bad english! :|
Logged

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: help..other 5v supply (lordnico's tut)
« Reply #9 on: August 09, 2009, 02:17:14 AM »
As long as you have soldered over where the resistor was then it will work, both the memory led and your mod.

Just some advice, After you have soldered the power wire to the 5v point, use some glue or tape to secure the wire to the mobo. This will stop it moving and possibly breaking off when rebuilding the psp.
Logged

Offline Friguletz

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: help..other 5v supply (lordnico's tut)
« Reply #10 on: August 09, 2009, 04:37:27 AM »
ok.. thanks... hope i will make it :)
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal