Author Topic: battery mod queries  (Read 1483 times)

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
battery mod queries
« on: August 22, 2009, 09:00:11 AM »
hey guys...i just opened up my phats battery...

on the process i accidentally cut my way through the cell itself twice or thrice...

causing to burn a little and some smoke...which is unpleasant to smell and makes my

tummy ache as i inhale some  smoke coming out from it...

and when i finally opened it up i decided to draw a diagram as i want to share with

everyone and as well consult with you guys my plan...i want ur opinion on this...

the image is straight forward..so let me know if i need more modifications so i can pull this

one off..much help would be appreciated

this is the board itself...



btw i'm not really planning to squeeze two 3.7v battery at phats battery compartment..
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline injungleist

  • Club AM VIP
  • Who Farted ???
  • *
  • Posts: 200
  • Post quality +0/-0
  • Gender: Male
  • mod your face off.
Re: battery mod queries
« Reply #1 on: August 22, 2009, 09:30:09 AM »
im not really sure, but you put two 9 volts togather dont you get 18 volts?
if so, the drawing you have would make 7.4 volts.
like i said im not sure, but that would be something to look into.

also there is a regulator to charge the battery, so that being said, wouldnt it charge one battery and stop.
thx gamerdude767
trades w/ blazinkaos
purchases from sniper (fast shipping)

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: battery mod queries
« Reply #2 on: August 22, 2009, 09:38:59 AM »
i just took off the stock cell of the phats battery then replace it with two 3.7v battery..

i will still use the circuit board...
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline rceckspurt13

  • Acid Modder
  • *
  • Posts: 637
  • Post quality +2/-0
  • Gender: Male
Re: battery mod queries
« Reply #3 on: August 22, 2009, 11:57:33 PM »
im not really sure, but you put two 9 volts togather dont you get 18 volts?
if so, the drawing you have would make 7.4 volts.
like i said im not sure, but that would be something to look into.

also there is a regulator to charge the battery, so that being said, wouldnt it charge one battery and stop.

thats only if the batteries are hooked in series. if they are in parallel, then the voolts wil not increase, but the mah will.

you may still be able to charge the batteries with the stock charger.

this should work, but noone will know until someone tries it.
Any Questions? Please Contact Me: rceckspurt13@gmail.com

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: battery mod queries
« Reply #4 on: August 23, 2009, 12:09:48 AM »
well i did the parallel so it will increase my mah right?

so i will have more extended battery life span right?

btw i will be using nokias bl4 battery...

i'll get you updated once i'm done with this mod..
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline rceckspurt13

  • Acid Modder
  • *
  • Posts: 637
  • Post quality +2/-0
  • Gender: Male
Re: battery mod queries
« Reply #5 on: August 23, 2009, 03:36:58 PM »
yeah thats correct. battery life should be increased.

Any Questions? Please Contact Me: rceckspurt13@gmail.com

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal