LED Problems

[toshio]

Hi i am new at modding i had recently put in 0603 LED and was wondering why the right trigger is dimmer than the Left side. I know that the wires are soldered in good, is it the position of how the LED is or is it not getting enough power? And also will this fit on my power light when i switch it http://www.sparkfun.com/commerce/product_info.php?products_id=7844.

[injungleist]

i found while doing the led mod some leds are faulty. for future reference you should test them before finishing the mod. i would say to replace the led if possible.

[ryan0]

My money's on you not using a resistor and/or not positioning the led's symmetrically.

[toshio]

I dont have any resistors. and also I am soldering my LED to the speakers.

My money's on you not using a resistor and/or not positioning the led's symmetrically.

[psp339]

I dont have any resistors. and also I am soldering my LED to the speakers.

If you soldered them to separate speakers, try soldering both to the same speaker.

[FaT3oYCG]

make sure you didnt wire in series, make sure same speaker, you may want a small resistor.

[echo30]

i tried this mod also..but have no luck...1st it works..but when i put back the psp cover and every things it didnt work out.i tried open and put all back togather several times...but still no luck...lastly i put the LCD cover and screws it while let my led still turn....then suddenly my psp turn off..i try to turn it on again..but the green light just flashed once...then nothing happen....i think i burned my mobo...so can anyone help me to fixed that problem??