Author Topic: Looking to find a few products  (Read 960 times)

Offline lakrulez14

  • Registered BST
  • Ω Allumnist Ω
  • *
  • Posts: 130
  • Post quality +0/-0
  • Gender: Male
  • AcidMods Rule
Looking to find a few products
« on: December 10, 2009, 10:17:23 PM »
ok ive been searching google for the past two days now for these 3 items but cant find them so i came to the experts  :tup:

First item:
im looking for a lcd screen.
max size 7.5x5 inches
min size 5.5x3 inches
not too thick, about the size of the ones in picture frames

Second item:
2.5mm output jack (mic jack)
one i could use in a hobbie

Third and last item:
3.5mm output jack (headphone jack)
one i could use in a hobbie

if anyone could find any of these items i will be very grateful.
thx in advance

Offline ModderDmo

  • Straight Cheddar
  • Fart Sniffer
  • *
  • Posts: 45
  • Post quality +0/-0
  • Gender: Male
  • If you can't open it, you don't own it.
Re: Looking to find a few products
« Reply #1 on: December 10, 2009, 11:21:55 PM »
You will most likely find most, if not, all of those on eBay. This is usually my next step if I can't find anything on Google.

Offline pigoesfar

  • King of the Wii-tards
  • *
  • Posts: 173
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Looking to find a few products
« Reply #2 on: December 11, 2009, 02:54:57 PM »
I would highly recommend digikey.com.  They have tons of specialty parts.

Offline DarkShot

  • I approve your mom
  • Acid Modder
  • *
  • Posts: 781
  • Post quality +0/-0
  • Gender: Male
  • ÜBERRAPESKILLETS
Re: Looking to find a few products
« Reply #3 on: December 11, 2009, 03:17:02 PM »
Sparkfun.com might have the LCD you're looking for. You'll have to take a couple mins and browse around. The other parts you're bound to get anywhere at any electronics/tinkering store or site.

Offline lakrulez14

  • Registered BST
  • Ω Allumnist Ω
  • *
  • Posts: 130
  • Post quality +0/-0
  • Gender: Male
  • AcidMods Rule
Re: Looking to find a few products
« Reply #4 on: December 11, 2009, 05:24:37 PM »
ok thx i found the 2.5mm and 3.5mm jacks, i found the lcd i needed but now another question pops up, how would it be possible to wire up a lcd module to a/v cables? would i HAVE to buy a lcd controller or is there a cheaper easier way to do it?

Post Merge: December 11, 2009, 09:37:56 PM
ok ive found a few screens but i need a way to make them work with this: http://www.simsimgate.com/1-2ghz-wireless-transmitter-receiver-80m-range-752

Here are the screens
This one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280435832395&ru=http%3A%2F%2Fshop.ebay.com%3A80%2F%3F_from%3DR40%26_trksid%3Dp3907.m38.l1313%26_nkw%3D280435832395%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1

This one:
http://www.getpartsonline.com/b089aw01.html

If someone can explain the way on how to make any of those screens work on that A/V transmitter/receiver I would greatly greatly appreciate it.
« Last Edit: December 11, 2009, 09:37:56 PM by lakrulez14 »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal