« previous next »
Pages: [1]   Go Down

Author Topic: PS3 Button Remap  (Read 3239 times)

Offline StoopidMunkee

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 63
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
PS3 Button Remap
« on: June 23, 2010, 09:00:01 AM »
i would like to find out how to remap ps3 buttons plez
http://www.llamma.com/xbox360/mods/extra-360-controller-buttons.htm
like that tutorial but for PS3 i wanna put the CIRCLE button mapped to under the controller
(for mw2 easy knifing i did it on my xbox its pretty dope)
Logged

Offline 802Chives

  • Sargeant at Arms
  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1304
  • Post quality +10/-0
  • Gender: Male
Re: PS3 Button Remap
« Reply #1 on: June 23, 2010, 10:56:02 AM »
it may be as simple as soldering a button accross the button traces.  One side of the button is a common line (R common) for the right side of the controller buttons it is all the same and is an easy Test Point to grab.  the other side of the button will have to carefully found and may need to be scraped in order to be used.
Logged

Offline StoopidMunkee

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 63
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PS3 Button Remap
« Reply #2 on: June 23, 2010, 04:48:39 PM »
i am so lost lol. the ps3 controller is this sheet of plastic and only pcb where the analog sticks are.
Post Merge: June 23, 2010, 05:08:40 PM
« Last Edit: June 23, 2010, 05:08:43 PM by StoopidMunkee »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: PS3 Button Remap
« Reply #3 on: June 24, 2010, 08:03:04 AM »
It really depends on which version of controller you have as to the best way to go about it, but you'll have to do the soldering on the main board of the controller for the new button, not the Daughter board.

If that board there looks like your controller, then TP18 and TP38 are the ones you'll solder the new button leads to for a duplicate O button.

http://forums.xbox-scene.com/index.php?showtopic=648322
« Last Edit: June 24, 2010, 08:08:15 AM by RDC »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline StoopidMunkee

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 63
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PS3 Button Remap
« Reply #4 on: June 24, 2010, 09:53:17 AM »
my controller looks like that except it has pads instead of those globs already there (solder globs) i cant find TP38 :(
« Last Edit: June 24, 2010, 10:23:32 AM by StoopidMunkee »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: PS3 Button Remap
« Reply #5 on: June 24, 2010, 01:45:05 PM »
It's right there pretty much in the middle of the large group of TP spots, can even see it in that pic there, between TP33 and TP37.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline StoopidMunkee

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 63
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PS3 Button Remap
« Reply #6 on: June 24, 2010, 02:41:09 PM »
im so confused i see the writing tp38 and now but i dont know where the pad is.
could you use paint and like make a circle im sorry for my nubbyness :( after i find it what spot do i connect it to?

TP38--------------[BUTTON]-------------???
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: PS3 Button Remap
« Reply #7 on: June 24, 2010, 03:40:21 PM »
First reply I made has both TP spots you'll be using for the duplicate O button.

The actual TP spots are up and to the left of where that marking is, there's just no room for them to be right next to the actual TP spots on the board.

That large grouping of 8 TP spots there in the middle has TP38 in it..

TP32-TP39-TP31
C15-TP33-TP38-TP37
--------TP40-TP34
« Last Edit: June 24, 2010, 03:49:44 PM by RDC »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal