Author Topic: Pulsevu for controller (Read 4581 times)

whitetop · « **on:** April 12, 2011, 12:43:19 PM »

has there one been done for the ps3 controller i have blue,green,red,purple leds on my player and was thinking it would look nice with a Pulsevu??

hyper999 · « **Reply #1 on:** April 12, 2011, 12:45:40 PM »

english?

whitetop · « **Reply #2 on:** April 12, 2011, 12:53:17 PM »

sorry put this wrong i was looking at the rol thread while doing this

changed my post would a Pulsevu work on a pad ???

hyper999 · « **Reply #3 on:** April 12, 2011, 12:56:16 PM »

should do, i know that the micro controller that it is based on would work in a pad. it might need a bit of modification but it should work

Modded Matt · « **Reply #4 on:** April 12, 2011, 06:06:09 PM »

where are you going to get the audio for the pulsevu from a controller?

whitetop · « **Reply #5 on:** April 13, 2011, 04:08:58 AM »

can it not pulse from the rumble ?

Modded Matt · « **Reply #6 on:** April 13, 2011, 04:49:48 AM »

I guess it could, I would think the program may need to be modified though... but that is a cool idea.

Phantom · « **Reply #7 on:** April 13, 2011, 05:09:14 AM »

It has fading modes aswell, not the just the audio sync

i dunno about the rumble, you could probably just hook up the left and right audio pads on the pulsevu to the left and right rumble packs.

good luck trying to find one, they are discontinued and ive yet to find anyone that has them in stock.

i think theres someone on ebay selling the pulsevu2, not the 2x for 360 though.

whitetop · « **Reply #8 on:** April 13, 2011, 05:10:43 AM »

well i know we need ps3 mods and den is pinning out the ps3 console so im trying to think of stuff for the controller but is kinda hard when theres not much room in it.

Modded Matt · « **Reply #9 on:** April 13, 2011, 05:11:05 AM »

foo foo made his opensource on his site taylor made toys.

Phantom · « **Reply #10 on:** April 13, 2011, 05:38:49 AM »

i couldn't find anything on his site, do you have a link?

all i could find was an nds rumble mod that looked similar, but no mention of opensource or how to build it.

edit - found it... wow

1TONpete · « **Reply #11 on:** April 13, 2011, 06:12:00 AM »

Idea .Along these lines. You guys seen crazie's mp3 controller? Take that mod apply it to the ps3 controller, integrate a bluetooth head set into the controller. Hook the audio from the mp3 to the mic input on the bluetooth. tie in your led vu meter. At least in multiplayer you can drown out the lil kids. and have a cool led.

hyper999 · « **Reply #12 on:** April 13, 2011, 10:48:31 AM »

the Pulsevu from sickmods is opensource, i can hook you up with the AVRs for it if you want, and help out with to circuit design

whitetop · « **Reply #13 on:** April 13, 2011, 11:02:56 AM »

got no programmer as of yet but once my big money comes in ill be getting on so i can start testing a few things

ill look on sickmods

hyper999 · « **Reply #14 on:** April 13, 2011, 11:09:44 AM »

Quote from: whitetop on April 13, 2011, 11:02:56 AM

got no programmer as of yet but once my big money comes in ill be getting on so i can start testing a few things

ill look on sickmods

thats what i meant, if you need any programmed AVRs i can hook you up if you reimburse me for the chips and the postage

edit: btw do you mean the sickmods fader(makes the rol fade in and out like a breathing effect)? because the pulse VU is for sound reactive LEDs and there is no audio source in a controller...

whitetop · « **Reply #15 on:** April 13, 2011, 11:26:13 AM »

well both in a way and dens idea did sound good but the smallest one would be better

hyper999 · « **Reply #16 on:** April 13, 2011, 11:32:51 AM »

all you need for the fader is an 8pin IC

whitetop · « **Reply #17 on:** April 13, 2011, 01:08:09 PM »

i think a ipod shuffle would be good to put in as its nice and small that the pulseuv should get the sound off?

1TONpete · « **Reply #18 on:** April 13, 2011, 01:46:08 PM »

I really like this idea. I even have a small amp and speakers powered by 3v. I think i might do some design work while I wait for parts for my other projects. Much props to crazy for his work on the xbox mp3 controller.
Nice specs page on nano touch.

you could do it similar to the chotto shot mod for the psp , I mean by switching the usb between controller and the ipod. so you could charge/data both from 1 usb cord. Maybe even make it dock-able.
And touch screen means very few extra buttons.
I checked the dimensions compared to the controller, and it would fit nicely right above sel and start. With little speakers on the top on each side by the shoulder buttons.
Well, after looking at prices for those ipod touches, I looked at big lots and found this.
25$ no touch though.

whitetop · « **Reply #19 on:** April 13, 2011, 03:06:49 PM »

sounds good den

Phantom · « **Reply #20 on:** April 13, 2011, 05:07:04 PM »

Quote from: hyper999 on April 13, 2011, 10:48:31 AM

the Pulsevu from sickmods is opensource, i can hook you up with the AVRs for it if you want, and help out with to circuit design

hyper i could use some help with the schematic, im not sure what parts i need.. https://www.acidmods.com/forum/index.php/topic,39235.0.html

1TONpete · « **Reply #21 on:** April 13, 2011, 07:56:36 PM »

I just realized a good use for this idea. Video walk through of games. You get lost press pause and check the video.
can we separate this into a new topic?

whitetop · « **Reply #22 on:** April 14, 2011, 03:55:46 AM »

yes den make a new one since this was about pulseuv lol

News:

Author Topic: Pulsevu for controller (Read 4581 times)