« previous next »
Pages: [1]   Go Down

Author Topic: What is the difference? ? ?  (Read 2415 times)

Offline madmike1488

  • Fart Sniffer
  • *
  • Posts: 45
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
What is the difference? ? ?
« on: June 11, 2012, 10:54:32 AM »
I posted this in the Electronics Projects first by mistake. Sorry, Anyway I'm new to programming pic chips and sofar have learned A LOT from this site, so real quick, Thanks for posting your projects and tuts. What I'm needing to know is, with a 12f683 chip, what is the difference in 12F683 E/MF, 12F683 E/P and 12F683 I/P? I'm getting ready to order some as soon as the programmer I built, (Thanks to this site) is complete.
Logged

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
Re: What is the difference? ? ?
« Reply #1 on: June 11, 2012, 11:12:20 AM »
12F683 I/P  :tup:
Logged
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$

Offline magic_man185

  • Who Farted ???
  • *
  • Posts: 229
  • Post quality +16/-0
  • Gender: Male
  • Acidmods User
Re: What is the difference? ? ?
« Reply #2 on: June 11, 2012, 11:48:53 AM »
I and E are the temperature ratings.  I stands for Industrial, which is the more common, and is -40ºC to 85ºC.  E stands for extended, which is -40ºC to 125ºC.  The I is what everyone uses for rapidfire projects, because temperatures are no where near the 85ºC range, so the higher range Extended version is not necessary.
Logged

Offline madmike1488

  • Fart Sniffer
  • *
  • Posts: 45
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: What is the difference? ? ?
« Reply #3 on: June 11, 2012, 12:45:28 PM »
Cool man, thanks for the info. I/P it is. :tup:
Logged

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: What is the difference? ? ?
« Reply #4 on: June 11, 2012, 02:15:40 PM »
you can order free microchip samples from microchip.
Logged

Offline magic_man185

  • Who Farted ???
  • *
  • Posts: 229
  • Post quality +16/-0
  • Gender: Male
  • Acidmods User
Re: What is the difference? ? ?
« Reply #5 on: June 11, 2012, 02:47:26 PM »
Only if you have a work email/.edu email address, or an email from a domain.  They will not accept web email addresses (gmail, yahoo, hotmail, etc.).
Logged

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: What is the difference? ? ?
« Reply #6 on: June 11, 2012, 04:28:55 PM »
Quote from: madmike1488 on June 11, 2012, 10:54:32 AM
...what is the difference in 12F683 E/MF, 12F683 E/P and 12F683 I/P?

It's also worth noting that markings after the "/" indicate the package.

P    -> PDIP
PA  -> PDIP
SN -> SOIC
OA -> SOIC
MD  -> DFN
MF  -> DFN-S

I'm willing to bet you probably don't want the 12f683 E/MF.
Logged

Offline madmike1488

  • Fart Sniffer
  • *
  • Posts: 45
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: What is the difference? ? ?
« Reply #7 on: June 12, 2012, 04:30:20 AM »
Thanks Matt for the info. I've an edu. email so I'll try that. If it don't work then I'll just order them from Mouser. They have it to where you can order 10 for like 11 bucks (shipping not included of course). Figured I'd get a few of em because I'm sure I'll screw one or two of em up. LOL Rightnow I'm building a JDM programmer but I've only been able to mess with it for a couple of minutes here and there due to work, kids and school.
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal