« previous next »
Pages: [1]   Go Down

Author Topic: 12f683 breakout  (Read 2726 times)

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
12f683 breakout
« on: July 06, 2013, 06:46:37 AM »
did a simple 12f683 breakout board with a 8 pin ffc/fpc connector meaning you can install this into what whatever then using a ffc ribbon cable going into the header you can hook it up to your pic programmer for reprogramming etc both pcb's measure 0.6x 0.6 inches kinda hard to get it any smaller and the fpc connector is a bottom contact 1mm pitch

« Last Edit: July 06, 2013, 06:50:00 AM by 3D0kassiah »
Logged
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$

Offline Gizmo613

  • MFH
  • Acid Modder
  • *
  • Posts: 547
  • Post quality +17/-0
  • Gender: Male
  • Acidmods User
Re: 12f683 breakout
« Reply #1 on: July 06, 2013, 08:13:17 AM »
you do your best work when you are drunk , so keep drinking!!
Logged

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
Re: 12f683 breakout
« Reply #2 on: July 06, 2013, 08:19:20 AM »
Quote from: Gizmo613 on July 06, 2013, 08:13:17 AM
you do your best work when you are drunk , so keep drinking!!

so this sucks? lol
Logged
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$

Offline Gizmo613

  • MFH
  • Acid Modder
  • *
  • Posts: 547
  • Post quality +17/-0
  • Gender: Male
  • Acidmods User
Re: 12f683 breakout
« Reply #3 on: July 06, 2013, 08:24:31 AM »
Its A Nice Breakout Board.
Logged

Offline gameroms

  • Granny Spanker
  • *
  • Posts: 376
  • Post quality +3/-0
Re: 12f683 breakout
« Reply #4 on: July 06, 2013, 01:57:17 PM »
Looks real nice!!
Kind of similar to the wii modchip i used, I still have the programmer for that wii modchip if you would like some good pics of it.  Hell i could even mail it to you if it would help with your project.


https://www.acidmods.com/forum/index.php/topic,21748.0.html
« Last Edit: July 06, 2013, 01:59:24 PM by gameroms »
Logged

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
Re: 12f683 breakout
« Reply #5 on: July 06, 2013, 07:21:34 PM »
lol i just like messing around sometimes i have some free time so i try and design random things
but if it something you want or something similar i can take a crack at it
this is basically almost the same thing as long as the points are there you can reprogram without uninstalling anything
just those ffc/fpc connector are hard to come by here in the states   :dntknw:
Logged
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal