« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: Cyber skull Xbox 360 slim  (Read 17035 times)

Offline The End of A Heartache

  • Granny Spanker
  • *
  • Posts: 411
  • Post quality +3/-0
  • Gender: Male
  • Mr. Martinez
Re: Cyber skull Xbox 360 slim
« Reply #30 on: May 20, 2013, 07:09:38 PM »
So I got my lights in today :) Been waiting awhile for them bored out of my mind lol

So a quick show where the lights will be going. Around the fan and last internally in the optical drive (If there is clearance)


So fan first, I went ahead and slide the replacement fan and the duct around. Hmm got tight area.


I marked off where the fan line will be sitting in position. Once I lay my lights in this will help me avoid lighting this area.


So I sanded the duct ring. Two main reason why I did this, first there was so small rise which align some foam that helped reduce vibration (guessing). Second, Since the area was nice and smooth I worried that the lights once on will begin to slip out. So rough texture helps.


And indeed it does help the lights went on and feel nice and secure :)


Quick show of where the light end and where it begins. I went and separated the sealant from the strip to expose the tabs.


So a quick fit test and yes using the replacement fan it fits nice and snuggle :)


Since the white are 50/50 SMD I went ahead and used their position as reference. I did this twice using my stock fan as a test.


I used the stock xbox slim fan to do some drilling for the lights.. You can see I am off :/ how disappointing.


To fix this and make it easier for me to work around the issue I went ahead and cut the section where the light will shine through. I also added some foam.


Back to test fitting and you can see the foam helps to seal around the fan and duct. Hopefully this will help direct air.


Again test fit of some of the stock parts. I might end up painting the Hard drive port in fluorescent orange just because lol.


Well still waiting on Rodent to send me some part to help me finish RGHing my xbox so I can finish the rest of the mod.

I still need to lay in the window and buy some plastic weld and lay my green light strip around the case as well need to wire my lights to a small slide switch. I was thinking of using two switches to control lights individually but I might just add one switch for both sets of light.

I also need to get myself a UV light for my room and to show off my xbox 360 slim
Logged
...emo freak out! >.< ........

random is fun

Offline The End of A Heartache

  • Granny Spanker
  • *
  • Posts: 411
  • Post quality +3/-0
  • Gender: Male
  • Mr. Martinez
Re: Cyber skull Xbox 360 slim
« Reply #31 on: May 21, 2013, 07:01:14 PM »
Alright so I am am working on the Optical part of the mod.

I layed down some masking tape and on that a small section of UV light strips.


I drilled a hole so I can run some wires through


After awhile of brainstorming I thought about soldering my line internally to the optical drive.

Issue is I don't know if I can use this image of the pinout for the xbox 360 optical drive power connection since I am using an xbox 360 slim.


But in either case doesn't hurt to try.. So I marked my area to solder. Red being a 12 volt + power source and black being my - Ground. 


I want to test this out but still waiting on stuff to arrive so I can RGH and finish up lol.

Still does anyone know if the same pinout carry for the xbox 360 slim??
Logged
...emo freak out! >.< ........

random is fun

Offline Phantom

  • Club AM VIP
  • Granny Spanker
  • *
  • Posts: 355
  • Post quality +11/-1
  • Gender: Male
Re: Cyber skull Xbox 360 slim
« Reply #32 on: May 21, 2013, 10:47:24 PM »
« Last Edit: May 21, 2013, 10:49:49 PM by phantomz0 »
Logged

Offline The End of A Heartache

  • Granny Spanker
  • *
  • Posts: 411
  • Post quality +3/-0
  • Gender: Male
  • Mr. Martinez
Re: Cyber skull Xbox 360 slim
« Reply #33 on: May 22, 2013, 07:23:06 AM »
Logged
...emo freak out! >.< ........

random is fun

Offline ViSioNXx

  • Global Moderator
  • Granny Spanker
  • *
  • Posts: 381
  • Post quality +6/-0
  • Gender: Male
  • PC Guru
Re: Cyber skull Xbox 360 slim
« Reply #34 on: May 22, 2013, 07:38:25 AM »
ETA on the conclusion of this Mod? I cant wait to see it :)
Logged

Offline The End of A Heartache

  • Granny Spanker
  • *
  • Posts: 411
  • Post quality +3/-0
  • Gender: Male
  • Mr. Martinez
Re: Cyber skull Xbox 360 slim
« Reply #35 on: May 22, 2013, 08:48:31 AM »
Quote from: ViSioNXx on May 22, 2013, 07:38:25 AM
ETA on the conclusion of this Mod? I cant wait to see it :)

Still don't have no ETA on the conclusion its a slow going process to the end. Kind of feels like I am stuck on hold while I still gather small parts to finish. but I will always keep people posted :) I also can not wait to see how it looks haha black light still need to remember to get black lights haha
« Last Edit: May 22, 2013, 08:50:05 AM by The End of A Heartache »
Logged
...emo freak out! >.< ........

random is fun

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Cyber skull Xbox 360 slim
« Reply #36 on: May 22, 2013, 11:30:31 AM »
Quote from: ViSioNXx on May 22, 2013, 07:38:25 AM
ETA on the conclusion of this Mod? I cant wait to see it :)
in 2 to 3 days i just sent him a nand x so we can try and program the coolrunner to get this console RGHed
Logged

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline ViSioNXx

  • Global Moderator
  • Granny Spanker
  • *
  • Posts: 381
  • Post quality +6/-0
  • Gender: Male
  • PC Guru
Re: Cyber skull Xbox 360 slim
« Reply #37 on: May 22, 2013, 11:53:07 AM »
Sweet!!!
Logged

Offline The End of A Heartache

  • Granny Spanker
  • *
  • Posts: 411
  • Post quality +3/-0
  • Gender: Male
  • Mr. Martinez
Re: Cyber skull Xbox 360 slim
« Reply #38 on: May 22, 2013, 12:21:25 PM »
Quote from: Rodent on May 22, 2013, 11:30:31 AM
in 2 to 3 days i just sent him a nand x so we can try and program the coolrunner to get this console RGHed

Thank you so much Rodent :) its awesome I got the tracking information and saved it. Can not wait to get the hack finish so I can finish the mod.

So continuing with my mod.

Thanks to phantomz0 for the soldering pinout. As soon as I am done with the hack Ill start testing out my parts :)


Got a tight fit I taped over my solder I want to make sure I do not short myself out.


So few things done still a few left to do.


My ring of light for my fan I split the wire down about a foot since I will run everything to a switch the ground will be solder right to the board


Last things to solder are line to my lights which will be wrapped around the internal case and connected to the same switch for my fan lights.


That is all for today :)



« Last Edit: May 22, 2013, 02:28:39 PM by The End of A Heartache »
Logged
...emo freak out! >.< ........

random is fun

Offline FuzBie

  • Chief squatting Hard
  • *
  • Posts: 10
  • Post quality +0/-0
  • Gender: Male
  • Computer Nerd
Re: Cyber skull Xbox 360 slim
« Reply #39 on: May 31, 2013, 02:05:41 PM »
This Xbox looks really good! I like how the colors go with each other. Good work!
Logged

Offline The End of A Heartache

  • Granny Spanker
  • *
  • Posts: 411
  • Post quality +3/-0
  • Gender: Male
  • Mr. Martinez
Re: Cyber skull Xbox 360 slim
« Reply #40 on: May 31, 2013, 03:28:47 PM »
Quote from: FuzBie on May 31, 2013, 02:05:41 PM
This Xbox looks really good! I like how the colors go with each other. Good work!

:) Thank you very much. I am determine to finish it all. As soon as I finish I try to take pro picture and set them up
Logged
...emo freak out! >.< ........

random is fun

Offline The End of A Heartache

  • Granny Spanker
  • *
  • Posts: 411
  • Post quality +3/-0
  • Gender: Male
  • Mr. Martinez
Re: Cyber skull Xbox 360 slim
« Reply #41 on: August 05, 2013, 06:47:31 PM »
So I am back again to finally finish this mod.

It is a sad shame that I was not able to extract the key from this console  :cry2:

But at least now I can finish this mod off :) for sure.

So test fiting some of the parts that are going into the case


test run of the lights


And eject button


I need to cut some parts out but I am glad it all works well as it should and my console boots up nicely

Last few step includes

trimming some of the plastic for better fit

screwing it all down

cutting out a window and placing it in place on the shell body

putting it all together and taking some shots with black light on
Logged
...emo freak out! >.< ........

random is fun

Offline The End of A Heartache

  • Granny Spanker
  • *
  • Posts: 411
  • Post quality +3/-0
  • Gender: Male
  • Mr. Martinez
Re: Cyber skull Xbox 360 slim
« Reply #42 on: August 06, 2013, 04:18:17 PM »
So now finished with the rebuild

So finishing off where I left off I went ahead and cut out a place for the switch


Looks nice!


Well a quick turn on


Laying it down on it's side and a quick look of the disc drive tray under black light


Nice close up of the fan and UV ring light


And a slide of the switch


Love how the underside looks not as bright as the orange under the UV light


nice view of the front face


Better look with a nice closeup with the UV light


and the side, need to build another UV system


Last thing to do is make a black light box for that nice reactive look under the black light ;)

Logged
...emo freak out! >.< ........

random is fun

Offline Brennidon

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 58
  • Post quality +1/-0
  • Acidmods User
Re: Cyber skull Xbox 360 slim
« Reply #43 on: August 19, 2013, 01:27:39 PM »
Looking good man!
Logged

Offline The End of A Heartache

  • Granny Spanker
  • *
  • Posts: 411
  • Post quality +3/-0
  • Gender: Male
  • Mr. Martinez
Re: Cyber skull Xbox 360 slim
« Reply #44 on: August 19, 2013, 07:59:36 PM »
Quote from: Brennidon on August 19, 2013, 01:27:39 PM
Looking good man!

Thank you very much :)
Logged
...emo freak out! >.< ........

random is fun
Pages: 1 [2]  All   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal