« previous next »
Pages: [1]   Go Down

Author Topic: JDM-011 PCB Connection Points. HELP!  (Read 9029 times)

Offline diegodiniz

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
JDM-011 PCB Connection Points. HELP!
« on: July 12, 2015, 08:22:44 PM »
Guys, sorry my bad english cause i'm Brazilian.
But, I trying to X/O mod and I saw this topis with PCB Scans here:

https://www.acidmods.com/forum/index.php?topic=43542.0

My PCB is JDM-011 Model. Like This:



My doubt is: on the first model (JDM-001) you just have to 1 Point to X Button and 1 Point to Circle Button.

And now on this JDM-011, the image shows 2 points to X and 2 points to CIRCLE! So, I tried to paint at Photoshop for you guys help me.
I will have to solder 3 wires to each button???????? I dont understand how...


ORANGE - CIRCLE BUTTON
BLUE - X BUTTON

Please help me!
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: JDM-011 PCB Connection Points. HELP!
« Reply #1 on: July 13, 2015, 08:48:05 AM »
They are both marked for convenience.  You only need to use one of the marked spots.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline diegodiniz

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: JDM-011 PCB Connection Points. HELP!
« Reply #2 on: July 13, 2015, 09:16:37 AM »
Quote from: RDC on July 13, 2015, 08:48:05 AM
They are both marked for convenience.  You only need to use one of the marked spots.

Thanks for your Help!
But I still have to solder on the bottom, right??? Close of these Retangles on the bottom of PCB...

I founded this image on YouTube That shows the Points to solder, but its exactly the contrary of the topic that I saw here in AcidMods Forum.
Wich is correct???



He painted BLUE the X and painted ORANGE the Circle button, but its exactrly the contrary of PCB Scan shows...
Im afraid to soldering inverted...
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: JDM-011 PCB Connection Points. HELP!
« Reply #3 on: July 13, 2015, 10:41:30 AM »
If you read that description even they say that they do not know which way they go, I however do and have made mine correctly.

You can use any Ground spot for the other side of the new buttons.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline diegodiniz

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: JDM-011 PCB Connection Points. HELP!
« Reply #4 on: July 13, 2015, 01:46:51 PM »
Quote from: RDC on July 13, 2015, 10:41:30 AM
If you read that description even they say that they do not know which way they go, I however do and have made mine correctly.

You can use any Ground spot for the other side of the new buttons.

Do you remember wich is correct??? Youtube image or Forum image???
PS.: Im sorry to looking DUMB but i'm brazilian and I trying HARD to translate everything and try to do my Mod.
I just want a pictura that show the exactly point of X and Circle Buttons.
If you guys can do on Photoshop I really really really appreciate this!
Thanks Guys!
« Last Edit: July 13, 2015, 01:51:01 PM by diegodiniz »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: JDM-011 PCB Connection Points. HELP!
« Reply #5 on: July 13, 2015, 05:58:47 PM »
I made the ones on here, and those pictures are correct.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline diegodiniz

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: JDM-011 PCB Connection Points. HELP!
« Reply #6 on: July 13, 2015, 08:35:39 PM »
Quote from: RDC on July 13, 2015, 05:58:47 PM
I made the ones on here, and those pictures are correct.

SO, just to make sure and Finish...
This is how it HAVE TO BE, right???

Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: JDM-011 PCB Connection Points. HELP!
« Reply #7 on: July 14, 2015, 11:51:28 AM »
No, it can be done one of 4 different ways, but that is one of them.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline diegodiniz

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: JDM-011 PCB Connection Points. HELP!
« Reply #8 on: July 14, 2015, 06:30:07 PM »
Quote from: RDC on July 14, 2015, 11:51:28 AM
No, it can be done one of 4 different ways, but that is one of them.

Thank you very much Man! I will try to mod my controller and post here the results.
These Mini-Switch Buttons are OK to do it??? I dont want to remove the rumble motors, so I bought this:



is it OK for a long time???
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: JDM-011 PCB Connection Points. HELP!
« Reply #9 on: July 14, 2015, 08:27:39 PM »
That style switch is fine to use, but it depends on which ones you have there exactly as they can be rated for a minimum of 100,000 cycles (times you can press them) up to 1,000,000 cycles.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline diegodiniz

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: JDM-011 PCB Connection Points. HELP!
« Reply #10 on: July 20, 2015, 03:03:22 PM »
RDC, thank you very much for your Replies!
My Mod its OK and Working 100% here!!!
Thank you very very much for your HELP!
When you guys discover where JDM-020 points are, please Post it!
It will help a lot of people.

I am very happy with my new Mod Controller here and Waiting for Call of Duty Black Ops 3 !
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: JDM-011 PCB Connection Points. HELP!
« Reply #11 on: July 20, 2015, 03:07:36 PM »
You're Welcome.

The JDM-020 info was posted 2 months ago.  https://www.acidmods.com/forum/index.php/topic,43542.0.html
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal