N3rdy's 6 mode Ghost setup

[WHITE 4ND N3RDY]

http://www.mediafire.com/view/tt4b6ysrrmm05zw/opensourse%20V2.hex


Above is another one of my media folders with my opensource hex. Modes are as followed.

1)Ghost RF
2)Ghost baseball slide for full autos (UA) User adjustable
3)Ghost baseball slide + RF (UA)
4)Ghost dual RF (UA)
5)Ghost dual RF + baseball slide (UA)
6)LT sprint assist / sniper breath

Baseball slide works when your sprinting then hold RT. U will slide then RF. U can aim as well but wait till u slide first. If u hit aim first u will just drop shot. These also double as drop shots.

I made almost every mod user adjustable if u want to mess around with it. My main reason for making this was for kingmikes boards. U can run two chips at once an I thought this would be a nice add on feature to my 10 mode jitter. U can run two mods at on time like this. Keep in mind u dont need his boards to do this. U can clone your chip to your other chip. I dont care to explain this right now but if u must know PM me and Ill walk u through the process.

Ok so I dont have a visual schematic so Ill just explain where to wire the chip.

Pin #1 VDD
      #2 LED
      #3 LT (left trigger)
      #4 Tac
      #5 Ground to board & Tac
      #6 LS (left stick)
      #7 B button
      #8 RT (right trigger)

I have not tested this out but im positive everything will work as implied. Try it out and please let me know if it works for u thanks!

[RDC]

What chip are you using? because pin 8 on the 12F683 is Ground.

 Top of 12f683

--- U ---
1        8
2        7
3        6
4        5
---------

That seems more like it should be

Pin #1 VDD
      #2 LED
      #3 LT (left trigger)
      #4 Tac
      #5 RT (right trigger)
      #6 B button
      #7 LS (left stick)
      #8 Ground to board & Tac

[WHITE 4ND N3RDY]

This is sethmods opensource chips This is not the wiring for this specific chip so everyone knows.

You are right RDC. Please follow RDC revision of my mess up! sorry people im pressed for time so im kinda kicking these things out LOL.

[RDC]

No prob, just wanted to make sure, cause you'd have received a pile of 'doesn't work at all' test reports if it was wired that way.

[Gizmo613]

awesome will try this this weekend.

i will be using kingmikes board so i'll post up some wiring for it as well.

[fevera1985]

This will still need a 2N3906 transistor for the B button on a Mattix2 board correct ?
Also is this sethmods sources meaning it will need the 10k Resistor from Pop in 1 to 4 .

[Gizmo613]

This will still need a 2N3906 transistor for the B button on a Mattix2 board correct ?
Also is this sethmods sources meaning it will need the 10k Resistor from Pop in 1 to 4 .

it will need the 10k resistor yes. Not sure on the matrix boards though

[SethMods]

Yes, you will need a 2N3906 for any buttons you want to control.

[WHITE 4ND N3RDY]

Let me know how this code works for u. I threw it together pretty quick and dident get to test it out as much as I should of.

For any of u tactical players u can wire the B pin to the RS connection on the controller so it can be tactical friendly.