Author Topic: help for diagram ds4 jdm-030 component came off  (Read 1088 times)

Offline jaluk

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
help for diagram ds4 jdm-030 component came off
« on: May 25, 2021, 11:21:11 PM »
Goodmorning everyone. I am looking for the motherboard diagram of the ds4 jdm-030. Can anyone provide it to me? a small component has come off above the left stick but I can't post the photo to you. Thank you

Offline wickated

  • King of the Wii-tards
  • *
  • Posts: 176
  • Post quality +0/-1
  • Acidmods User
Re: help for diagram ds4 jdm-030 component came off
« Reply #1 on: May 26, 2021, 01:10:57 AM »
u still can post photo of place where that component was.

Offline jaluk

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: help for diagram ds4 jdm-030 component came off
« Reply #2 on: May 26, 2021, 01:23:28 AM »
I can't attach the photo to the post. how can I do?if I click "insert image" in the message is automatically written "[img] [/ img]". I copy paste but nothing
« Last Edit: May 26, 2021, 05:27:53 AM by jaluk »

Offline wickated

  • King of the Wii-tards
  • *
  • Posts: 176
  • Post quality +0/-1
  • Acidmods User
Re: help for diagram ds4 jdm-030 component came off
« Reply #3 on: May 26, 2021, 10:11:56 AM »
u should use external image sharing site

Offline jaluk

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: help for diagram ds4 jdm-030 component came off
« Reply #4 on: May 27, 2021, 06:40:56 AM »
« Last Edit: May 27, 2021, 12:44:37 PM by RDC »

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: help for diagram ds4 jdm-030 component came off
« Reply #5 on: May 27, 2021, 12:41:45 PM »
It's just a decoupling Capacitor on the 3.2v rail, the controller will still work perfectly fine with that missing.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline jaluk

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: help for diagram ds4 jdm-030 component came off
« Reply #6 on: May 27, 2021, 12:58:18 PM »
thank you but
the game characters walk to the left, so I thought I'd look at the circuit and noticed that that component was missing. In addition, I have already replaced the analog sticks. Suggestions?

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: help for diagram ds4 jdm-030 component came off
« Reply #7 on: May 28, 2021, 07:02:40 AM »
That Cap missing isn't causing that. If it's a full press to the left, then there is an open or short somewhere with the stick connections. If it's just slightly pressed left, aka stick drift or drifting, then there are loads of posts on here about that and several ways to address the issue.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal