« previous next »
Pages: [1]   Go Down

Author Topic: 1708 - Solder pad ripped off on right stick  (Read 754 times)

Offline FRichardson

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
1708 - Solder pad ripped off on right stick
« on: June 20, 2021, 12:29:14 PM »
Does anyone know where this solder joint should connect with a jumper wire? The solder pad lifted up when I removed the right joystick. Below is the links to the image.

https://i.postimg.cc/8PV7WJGv/image0.jpg
« Last Edit: June 20, 2021, 12:29:48 PM by FRichardson »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1708 - Solder pad ripped off on right stick
« Reply #1 on: June 20, 2021, 01:35:35 PM »
That is just a solder lug for holding the stick onto the board, it's ground, but it's purely a mechanical connection. That one missing will not really hurt anything.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline FRichardson

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 1708 - Solder pad ripped off on right stick
« Reply #2 on: June 21, 2021, 06:53:59 AM »
Sounds good. I will solder a new joystick and hopefully it works.
Logged

Offline FRichardson

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 1708 - Solder pad ripped off on right stick
« Reply #3 on: June 21, 2021, 12:29:40 PM »
On the gamepad tester it is showing that the right stick is still moving even though I have not solder a new joystick. Is there a capacitor or resistor that I need to check around the right stick?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1708 - Solder pad ripped off on right stick
« Reply #4 on: June 21, 2021, 12:36:28 PM »
If there is no stick installed then the lines are floating and they will do all sort of weirdo things.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline FRichardson

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 1708 - Solder pad ripped off on right stick
« Reply #5 on: June 21, 2021, 12:41:13 PM »
Is that normal to do that if there is no stick or is there something else going on?
Logged

Offline FRichardson

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 1708 - Solder pad ripped off on right stick
« Reply #6 on: June 21, 2021, 07:53:54 PM »
I installed a new right joystick and everything seems to be working fine. I appreciate the help RDC.  :#1: :victory: :tup:
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1708 - Solder pad ripped off on right stick
« Reply #7 on: June 21, 2021, 10:08:36 PM »
Welcome.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal