Author Topic: USB pin lifted off MoBo  (Read 1800 times)

Offline chargdup

  • Chief squatting Hard
  • *
  • Posts: 24
  • Post quality +0/-0
  • Gender: Male
USB pin lifted off MoBo
« on: January 21, 2008, 05:25:35 PM »
Now I have asked many ppl about this before and they have said the padding (or the copper bits on the mobo) have come off.

Now it is probably really hard but is it possible to repair this or somehow re connected without using padding.

I know that buying a new mobo is easiest solution but I would rather try to fix it. It would be more fullfilling.

USB transfer mode doesn't work anymore but psp is fine.
PSP Black white buttons 3.90 M33
1st mod: USB charging failed, usb stuffed.
Next mod blue led swap

PSP-1001 Black 3.71 M33-4 Blue power, charge, mem card and wifi leds. Fixed WIFI and powerboard. Blue shoulder buttons Almost finished jewel

Offline MARIOPARTY53

  • I DONT FAIL
  • BANNED
  • E = MC² Mad Scientist
  • *
  • Posts: 1526
  • Post quality +0/-0
  • Gender: Male
  • Pc Gaming Rules
Re: USB pin lifted off MoBo
« Reply #1 on: January 21, 2008, 05:47:03 PM »
Well, its not that hard, but can you solder good?
However today I was brutally raped by a door handle, and none of my friends helped me up off the floor after ten minutes, instead they all teabaged me, all 10 of them...

Offline chargdup

  • Chief squatting Hard
  • *
  • Posts: 24
  • Post quality +0/-0
  • Gender: Male
Re: USB pin lifted off MoBo
« Reply #2 on: January 21, 2008, 05:58:48 PM »
I know how to solder properly but not very good with small stuff. I have ordered a low wattage soldering pencil so that should make it 100% easier the iron I used before was just stupid. Once i get it I will practise on a stuffed mobo I have then I should be alot better.
PSP Black white buttons 3.90 M33
1st mod: USB charging failed, usb stuffed.
Next mod blue led swap

PSP-1001 Black 3.71 M33-4 Blue power, charge, mem card and wifi leds. Fixed WIFI and powerboard. Blue shoulder buttons Almost finished jewel

Offline Azie139

  • Bomb Maker
  • *
  • Posts: 296
  • Post quality +0/-0
  • Gender: Male
    • Myspace.com/Azie139
Re: USB pin lifted off MoBo
« Reply #3 on: January 21, 2008, 06:39:12 PM »
How did u lift the pin on the mobo?

Offline chargdup

  • Chief squatting Hard
  • *
  • Posts: 24
  • Post quality +0/-0
  • Gender: Male
Re: USB pin lifted off MoBo
« Reply #4 on: January 21, 2008, 07:27:28 PM »
It was from using a blade to cut the excess solder off when there was way to much on there. Plus the amount of times I did it coz I wasn't using solder paste. I have the right tools coming as I ordered a whole bunch of stuff last week but at the time I was using a soldering iron with far too much wattage and a pretty big tip. Why I tried it I don't know.
PSP Black white buttons 3.90 M33
1st mod: USB charging failed, usb stuffed.
Next mod blue led swap

PSP-1001 Black 3.71 M33-4 Blue power, charge, mem card and wifi leds. Fixed WIFI and powerboard. Blue shoulder buttons Almost finished jewel

Offline Azie139

  • Bomb Maker
  • *
  • Posts: 296
  • Post quality +0/-0
  • Gender: Male
    • Myspace.com/Azie139
Re: USB pin lifted off MoBo
« Reply #5 on: January 21, 2008, 08:07:12 PM »
wow u should have gotten a desolder braid it works good and why would have u put so much solder also it has been said that using such big iron doesnt work out well

Offline chargdup

  • Chief squatting Hard
  • *
  • Posts: 24
  • Post quality +0/-0
  • Gender: Male
Re: USB pin lifted off MoBo
« Reply #6 on: January 21, 2008, 08:12:19 PM »
Yes I know this now. I have all the right tools coming. I knew this before but I ignored it.
PSP Black white buttons 3.90 M33
1st mod: USB charging failed, usb stuffed.
Next mod blue led swap

PSP-1001 Black 3.71 M33-4 Blue power, charge, mem card and wifi leds. Fixed WIFI and powerboard. Blue shoulder buttons Almost finished jewel

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal