Author Topic: Dpad Problem  (Read 1711 times)

Offline Skullmaster

  • God Of Cars
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1520
  • Post quality +1/-0
  • Gender: Male
  • Admin Force, Co-Owner Wanna-be
    • Acidmods
Dpad Problem
« on: March 13, 2008, 10:47:34 PM »
Ok, I cannot figure out why this is doing this. My dpad will not scroll right. If I just take the rubber pad and set it on the dpad board,it will scroll right perfectly fine but if I put the faceplate on it wont work. I switched my faceplate to a different one now so if I push super hard it will scroll right but it sucks to do this every time. If anyone has had this problem and knows what may be the problem let me know.

Offline Luke

  • E = MC² Mad Scientist
  • *
  • Posts: 1923
  • Post quality +12/-0
  • Gender: Male
  • ..
Re: Dpad Problem
« Reply #1 on: March 13, 2008, 11:32:07 PM »
what happens when you press reaqlly hard on the right button?

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
Re: Dpad Problem
« Reply #2 on: March 14, 2008, 07:33:49 AM »
ok this might be yor fix when you put the screen brace and lcd in make shure that the notches on the right side of the d pad line up and go into the slits higher up on the lcd brace and not pushed down by the lcd or brace.

Offline robin1989

  • Site Owner - Site Maintenance & development
  • Administrator
  • Mad Bomber
  • *
  • Posts: 6272
  • Post quality +21/-0
  • Gender: Male
  • Site owner
    • Acidmods
Re: Dpad Problem
« Reply #3 on: March 14, 2008, 08:02:30 AM »
i had this problem i thing ages ago i narrowed it down to 2 thing that seemed to fix it
1 i took the dpad off and put it back on making sure it was seeted and screwed in properly
2 i made sure all the screw were in place and screwed in fully and tight

if that doesnt work then maybe striping it down and putting it back together will work but it may also be the FP your using causing the problem so check it against a few other FP includeing a stock one if you have it

i am not responsible for what i do or my advice


Get the iPhone 4s from Three using Quidco and recieve £109 cashback

Offline bsbuk

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
Re: Dpad Problem
« Reply #4 on: March 14, 2008, 09:21:08 AM »
ive had this problem on 2 phats, what i did was, i took the buttons out, and filed down the right button a bit, worked for me :)

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: Dpad Problem
« Reply #5 on: March 14, 2008, 09:59:51 AM »
the black part of the d-pad (where the plastic foil stuff is on) has 2 (maybe 3) plastic hinges on the right side
they must fit perfectly in the lcd-cage if they arent in the lcd cage, you get that problem (i had thesame)



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline psphacksntips

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 69
  • Post quality +0/-0
  • Gender: Male
  • PSPHACKSNTIPS| From originality to insanity....
    • For PSP hacks n tips visit us @ PSPHACKSNTIPS
Re: Dpad Problem
« Reply #6 on: March 14, 2008, 03:19:25 PM »
try to clean the d-pad censor
======================
PSPHACKSNTIPS
| From originality to insanity|
======================

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: Dpad Problem
« Reply #7 on: March 14, 2008, 05:11:40 PM »
try to clean the d-pad censor

wtf? it is about the d-pad not the analog stick(which works with sensors)
d-pad is just 4 momentary switches



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal