188k ohms 22k ohms ?

[folklord36]

do resistors have to face a certin way to work because i just put a 10 ohm resistor on my 603 wired to a lm386 and it dose absoloutly nothong so what do i do ? or is my restistor too weak to have my leds off with no sound or slighly light and super bright with sound on a lm386 ?


also i have a internal speaker and want to amplyfy it because i know it can go way louder but the lm386 just distorts the sounddose someone know a better amplyfyer

[folklord36]

doe anyone know what resistor typicly goes on a 603 powered by a lm386? plz im about to go to radio shack?

[DUKE]

191k-ohm Resistor
 30k-ohm Resistor

[folklord36]

thank you im gona go buy some

[sprocketme2]

Actually, no resistor is used from the lm386 to the 603 leds, however as DUKE said a 191k ohm resistor and a 30k ohm resistor are put on the positive and negative inputs (wires from speaker) of the lm386 chip respectively.

[folklord36]

ok they didnt have any of the resistors that you said at radio shack where can i get them?

i did buy some 100k ohm resistors  and some 22k ohm resistors closest ones they had

if i put 2 100kohm resistors and a 22k ohm resistor instead of the 191k and 30k will i get the same results maybe a little dimer or something?

[GhoSt]

to anwser your first question i think all resistors can go both ways round.

[folklord36]

ok so i put 188k ohms of resistance with a 100kohm resistor and four 22k ohm resistors on the positive input pin on the lm386 and one 22k ohm resistor on the input negitive pin and when i turn my psp on the leds light up to full brightness then go off  but when i play music not the slightest flicker why what is wrong? where do i ght those resistors any stors cary them

[folklord36]

dose anyone have a suggestion on a different resistor set up i cant find 191k oms and 30 k ohm but i have 100k ohm sand 22 k ohm and 10 ohm

[j.s2ghetto]

you need to check this out https://www.acidmods.com/forum/index.php?topic=13477.0 and if u need any thing get on msn /yahoo/or aim we can talk