Author Topic: Need an easy 5V solder point on mobo, quick  (Read 2404 times)

Offline MadMax11

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 55
  • Post quality +0/-0
  • Gender: Male
Need an easy 5V solder point on mobo, quick
« on: June 14, 2008, 01:51:35 PM »
I'm doing a speaker mod and the solder point on the power board is tiny! I need a picture of another 5V solder point, on the mobo, that is relatively easy to solder to. Thanks!
4 psps: 2 black phats, 1 broken daxter slim, 1 starwars slim

VoX

  • Guest
Re: Need an easy 5V solder point on mobo, quick
« Reply #1 on: June 14, 2008, 05:20:45 PM »
Use a multimeter to test for 5v points, it is easier than looking for documentation

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Need an easy 5V solder point on mobo, quick
« Reply #2 on: June 14, 2008, 05:47:11 PM »
there is no 'easy' solder points on the slim. the mobo points are just as small, but here's a pic of it anyway.

Offline joecrack57

  • King of the Wii-tards
  • *
  • Posts: 172
  • Post quality +0/-0
  • Gender: Male
Re: Need an easy 5V solder point on mobo, quick
« Reply #3 on: June 14, 2008, 08:30:56 PM »
i tried looking for 5v points and the mobo and only found 2 the one from nicos tut and another resistor then the rest are 2. something and i think 3v

Offline anthonyta

  • MFH
  • Granny Spanker
  • *
  • Posts: 422
  • Post quality +1/-0
  • Gender: Male
Re: Need an easy 5V solder point on mobo, quick
« Reply #4 on: June 14, 2008, 11:42:26 PM »
you see the resistor in nico's tut? you can scratch that long trace to the right of that resister (the one that goes from the resistors to the top middle of the picture). just scratch that and solder there. works good

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Need an easy 5V solder point on mobo, quick
« Reply #5 on: June 16, 2008, 02:03:22 PM »
you see the resistor in nico's tut? you can scratch that long trace to the right of that resister (the one that goes from the resistors to the top middle of the picture). just scratch that and solder there. works good

That, was extremely useful...

Sig by Kenshinffx - Thanks!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal