Author Topic: i need help with razor X  (Read 1839 times)

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
i need help with razor X
« on: June 30, 2008, 04:03:27 PM »
i got a razor x board and i assembled it with a spring and nothing it doesn't work  :cry2: can some one tell me wat is up and possibly help me fix it

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: i need help with razor X
« Reply #1 on: July 01, 2008, 05:54:34 PM »
Make sure all you conections are super CLEAN and  when you do a razor you should lift the pad a lil bit so the spring makes better contact.  But only the pads on the sides.

Oh and you probly know this but make sure its grounded correctly because i had a problem that my razor didnt work and its because the ground wire broke.

Good luck  :tup:

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: i need help with razor X
« Reply #2 on: July 01, 2008, 10:12:09 PM »
thanks

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: i need help with razor X
« Reply #3 on: July 02, 2008, 08:17:56 AM »
No problem,

If thers still problems post again and ill see if i can help  :tup:

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal