PSP wont charge

[Basil_Moulds]

my psp wont charge, i have 2 barsleft on it but when i plug it in the orange light wont come on, ive tried 2 wall charges one car charger and a usb charger. i read somewhere that i blew my 2.0 Amperes fuse but whats that?

[dedafmonteur]

hmm maybe your powerboard

[Basil_Moulds]

and where can i get one for a low price cus im broke, i think im going to brinng all my ps2 stuff into gamestop and trade it for a used psp

[dedafmonteur]

hmm how much is a used one?

oh maybe look on ebay for a cheap one

[joesnose]

my psp wont charge, i have 2 barsleft on it but when i plug it in the orange light wont come on, ive tried 2 wall charges one car charger and a usb charger. i read somewhere that i blew my 2.0 Amperes fuse but whats that?

dont know if this is your problem, i read somewhere that using 3rd party chargers, usb etc, the tip is too big and just messes up the socket for other chargers, the only way to test this realy is to us a docking station that charges.

[SYSTEM aka (Cyberpyrot)]

my psp wont charge, i have 2 barsleft on it but when i plug it in the orange light wont come on, ive tried 2 wall charges one car charger and a usb charger. i read somewhere that i blew my 2.0 Amperes fuse but whats that?

if you blew your fuse you can jumper it here is a pic

[Chaos]

Have you tried taking out your battery? Sometimes it just needs to have the connection set again

[billy23]

if you blew your fuse you can jumper it here is a pic

thank you i was looking for this my friend's wont charge either

[CypherColt]

if u cant fix it.. buy a psp battery charger and wen ur batt is low... jus take it out and put it in the charger! (and try to see if u can use ur psp with no batt but plugged into the wall..)

[Owizardo]

Sorry to be bumping an old thread but I am having the same problem, I have 3 PSPs only 2 of them I opened for modifications but now both of them wont charge, the third one seems to be charging fine with all 3 batteries from each PSPs.

I used a multimetre to test the voltage on the 2.5 amp it its getting 5v which i guess was normal im not an electronic expert but it gets voltage so my guess was that it works. But when test the multimetre on the battery metal plates, on the back of the PSP where you insert the battery, it does not receive any voltage. I tried on the working PSP and it receives around 2.5v - 5v.

So with all that being said could this be caused by the 2.5 amp, if so how would I go to make a sort of bridge and jumper it like it was suggested in this thread?

[supermoose]

have u tried charging it with the usb cable in aswell? as my psp will only charge with it in now lol

[BABYGOAT]

Hey,

Not sure if this helps, but when i did the USB Charge mod mine did the same!
Found out that the solder was sticking up slightly too much and touching the LCD cage!
If you have done this mod see if thats the case
Hope everything works out.

[m@DDm!k3]

not tryn to be a noob or anything but wut does jumper mean [sry for bumpin up the thread im having a similiar problemn i rly need help]

[Jumbo]

If your having a problem your supposed to make a new topic not bring up and old one 

Jumper=Bridge the fuse with solder 

[m@DDm!k3]

sry  by bridge u mean connect the the two with a wire? maybe?

[Jumbo]

Wire is one way,

But the best way is use a condective paint pen.

Radioshack should have them,

P.S. they are expensive but way worth it.

But easy way and cheap if you have supplys is solder over the fuse.

Just put some flux over it and then solder it