Author Topic: PSP external controller mod (F00 f00s doc oc thread declassified) PART 2 (Read 62257 times)

F00 f00 · « **Reply #180 on:** February 25, 2007, 04:35:10 PM »

Yeah, your right. I'll buy another psp, an do that one. I wont one with dual nubs anyway, for on the road.

Btw I'll be putting blue lighting in there. The cool part is that the white power light goes out when I plug the controller in. So the psp goes from all white to all blue.

andyellison · « **Reply #181 on:** February 26, 2007, 04:51:24 PM »

c'mon...do it...haha, nah, do what you will BUT, the only ones who brick psp's with downgrades and custom firmwares are :censored:s who dont read the directions...ive done ever single custom firmware hack to my psp and many other kid's psp's and since it took me around 12 months to research everything and ask everyone everything i could, i realized its no big deal and as long as you take your time and dont skip ANYTHING nothing will go wrong...but still its a sick mod and it is worth thinking about...but custom firmware is awesome...like, completely awesome, you can do anything....anything.

Everett · « **Reply #182 on:** February 27, 2007, 11:20:51 AM »

f00 f00,
Are you using the basic power indicator connections on the switch board to power all of the LEDs? I'm curious to see how much current it can handle.

F00 f00 · « **Reply #183 on:** February 27, 2007, 11:39:44 AM »

Well' I've been using a diferant hot spot recently (I'll take a pic on sat when I do another one). But the mobo I have now is the older moddle and dosent have it. So this one is using the point on the powerswitch board. I am also curiose aboout why the power idicator goes out. Any ideas?

I also tried using the point you used on your switched sholder lights, but found that the led's would burn out if the charger was on for mor than an hour or so. I re tested the spot and discovered it had jumped to over 5v. Have you ever had that problem?

joesnose · « **Reply #184 on:** February 28, 2007, 02:07:14 PM »

Quote from: cyberpyrot on February 25, 2007, 04:24:06 PM

don't do it to risky

custom firmwares rock, there is always a risk but im sure its less risky than opening up your psp and soldering the

out of it, lol

SYSTEM aka (Cyberpyrot) · « **Reply #185 on:** February 28, 2007, 02:09:06 PM »

Quote from: joesnose on February 28, 2007, 02:07:14 PM

custom firmwares rock, there is always a risk but im sure its less risky than opening up your psp and soldering the out of it, lol

Yeah but it would suck if you opened it up to solder the piss out of it and brick it with firmware. Should of tryed the custom firm first then solder.

F00 f00 · « **Reply #186 on:** February 28, 2007, 02:11:03 PM »

Yeah. Its a bit late now. I'll make sure I've got it well documented. Then I'll give it a go.

F00 f00 · « **Reply #187 on:** March 01, 2007, 03:25:39 PM »

Ok. The SP at the moment is that I am having a few problems with the analogue stick. I seem to have a bad connection some where but cant find it. I am going to assume that its the the rubber psp connection as everything else tests perfect. I could make vid with what i have but it would be cheating slightly as this really isnt finished.

joesnose · « **Reply #188 on:** March 01, 2007, 04:39:19 PM »

you could solder wires in place of the STUPID rubber thingy, means your face plate doesnt come off without unscrewing the nub but it beats the hell outta the rubber.

F00 f00 · « **Reply #189 on:** March 02, 2007, 08:05:10 AM »

Tempting. I'll fidle with it a bit and try that If all else fails.

F00 f00 · « **Reply #190 on:** March 03, 2007, 11:43:09 AM »

Well I finaly got this finished today.

The problem with the analoge was actualy caused by the leds some how. I discovered when I pluged in the 3v plug it would get worse. So I diconected it. It was still a bit iffy so I used that line as a separate ground for the pots and that fixed everything.

Video is now done and up loading. I'll put together a mini work log post to go with it and release the video tonight.

EDIT: Oh and I did downgrade and now have OE-A.

SYSTEM aka (Cyberpyrot) · « **Reply #191 on:** March 03, 2007, 12:05:56 PM »

Quote from: F00 f00 on March 03, 2007, 11:43:09 AM

Well I finaly got this finished today.

The problem with the analoge was actualy caused by the leds some how. I discovered when I pluged in the 3v plug it would get worse. So I diconected it. It was still a bit iffy so I used that line as a separate ground for the pots and that fixed everything.

Video is now done and up loading. I'll put together a mini work log post to go with it and release the video tonight.

EDIT: Oh and I did downgrade and now have OE-A.

awsome I will be off and on tonight I replaced the two rear struts already now ima hunt down the elec problem

F00 f00 · « **Reply #192 on:** March 03, 2007, 12:08:33 PM »

Ok man I am working on the work log. Its in the bone yard.

Not sure what it is your working on btw. . .

Chaos · « **Reply #193 on:** March 03, 2007, 12:15:02 PM »

3.10 oe-a or 3.03 oe-a?

F00 f00 · « **Reply #194 on:** March 03, 2007, 12:18:04 PM »

3.10, I dont know if thats the best but it plays games from hypos psp and thats basicly what I was after.

Chaos · « **Reply #195 on:** March 03, 2007, 12:21:14 PM »

oo good stuff, can't wait to see the vid

SYSTEM aka (Cyberpyrot) · « **Reply #196 on:** June 21, 2007, 11:20:22 AM »

SplinterDs · « **Reply #197 on:** June 26, 2007, 11:33:24 PM »

is there a tutorial on this mod? if so can you post it here ill like to try this 1

Slimby · « **Reply #198 on:** June 27, 2007, 12:53:07 AM »

I guess it's one of those "If you can't figure it out without a tutorial, you shouldn't even try it" things. It'd be cool to find out what pins you used for each USB socket though.

Slimby

erb0817 · « **Reply #199 on:** July 15, 2007, 07:06:01 PM »

This looks amazing! Great job! Will there be a tutorial coming out to do this and if so when? I want to know before I tear apart a controller to take out the analog sticks.

SplinterDs · « **Reply #200 on:** August 16, 2007, 09:33:38 PM »

i got my soldering kit just waiting on the tut to start my first mod

SplinterDs · « **Reply #201 on:** August 18, 2007, 09:45:43 AM »

i am using the old ps1 controller it looks like this

FROM LEFT TO RIGHT
1-L2
2-L1
3-UP
4-RIGHT
5-DOWN
6-LEFT
7-GROUND
8-ANALOG ON/OFF
9-SELECT
10-START
11-SQUARE
12-X
13-CIRCLE
14-TRIANGLE
15-R1
16-R2

dedafmonteur · « **Reply #202 on:** August 18, 2007, 11:32:45 AM »

i dont think you can handle it. no offence

. but this is like EXTREME modding.

SplinterDs · « **Reply #203 on:** August 18, 2007, 07:41:54 PM »

i just finished the wires on the PS2 controller and moving on to the PSP.

jojoff974 · « **Reply #204 on:** September 18, 2007, 01:03:23 PM »

sory for my english, im french
just... if i take a "pad s xbox controller" is it possible ?

thanks

perseooo · « **Reply #205 on:** August 23, 2008, 01:13:48 AM »

where the mini USB

ProperBritish · « **Reply #206 on:** August 23, 2008, 03:19:48 AM »

ARGH Dont bring up old topics >.>

This hasnt been posted in for a year. Your question doesnt even make sense.

News:

Author Topic: PSP external controller mod (F00 f00s doc oc thread declassified) PART 2 (Read 62257 times)

Chaos

Chaos