Author Topic: USB cable problem  (Read 1071 times)

Offline caki83

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
USB cable problem
« on: January 19, 2011, 08:31:56 AM »
Ok , my usb cable stopped functioning so i opened the case and puled out the board and the 3 midle wires are not soldered.
so my question is : Does the psp uses all the 5 (4) wires?
thank u for your help :D


 
   

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: USB cable problem
« Reply #1 on: January 19, 2011, 09:01:21 AM »
it should be from left to right:

vdd, data-, data+, signal, gnd

yes you need them, but it should stil function without, just wont have usb capabilities

Offline caki83

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: USB cable problem
« Reply #2 on: January 19, 2011, 09:13:53 AM »
it should be from left to right:

vdd, data-, data+, signal, gnd

yes you need them, but it should stil function without, just wont have usb capabilities

yes the screen on psp shows please wait...
but i cant solder it,damn its to thin. any sugestions?

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal