Author Topic: Soldering accident  (Read 3414 times)

Offline yolk

  • Chief squatting Hard
  • *
  • Posts: 22
  • Post quality +0/-0
Soldering accident
« on: September 25, 2008, 04:55:38 PM »
wow, i dont seem to have a good rep as a psp modder. Well anyway, I got a friends slim psp to mod with leds, and I had an accident. I was following this guide, and I ended up using too much solder and it arched to another resistor looking thing. I kept trying to get it un soldered, but it ended up that the the resistor, the one that says anode, popped off. I got really pissed that it wouldnt start up, I stopped, and ordered a soldering iron to get the job done right (Weller WES51) So today I unarched the two resistor parralel to each other on the mobo. I turned it on, but the startes up, and without showing the xmb, keeps loading, shown by the ripple thing in the bottom right hand corner. the waves keep moving also. so i look for a thing that looks similar on a old cd play, solder it on, but it wont power on. then I try a 100 ohm resistor, it turns on and just loads, and the resistor gets real hot. now, im stumped. can any one identify what the little smd thing is.
here is the picture that I followed, and refered to.


Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Soldering accident
« Reply #1 on: September 25, 2008, 06:46:30 PM »
Well first, why on EARTH are you ever soldering there?!

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: Soldering accident
« Reply #2 on: September 25, 2008, 06:53:43 PM »
https://www.acidmods.com/forum/index.php?topic=21426.0

An a Noob made that tut and i guess they didn't know its the worst place to solder. I dont even know if it works.

Offline yolk

  • Chief squatting Hard
  • *
  • Posts: 22
  • Post quality +0/-0
Re: Soldering accident
« Reply #3 on: September 26, 2008, 05:47:21 AM »
lol, i feel like the stupidest person on earth right now. Yes I know I messed up, and I may have followed a crappy guide, regardless doesnt anyone know what the part I need is?

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: Soldering accident
« Reply #4 on: September 26, 2008, 01:02:24 PM »
lol, i feel like the stupidest person on earth right now. Yes I know I messed up, and I may have followed a crappy guide, regardless doesnt anyone know what the part I need is?
\

Well I cant really tell because that tut had the worst pictures ever...

But it looks like a Cap (Capacitor) not a resistor.

 

Offline yolk

  • Chief squatting Hard
  • *
  • Posts: 22
  • Post quality +0/-0
Re: Soldering accident
« Reply #5 on: September 26, 2008, 03:00:49 PM »
I would appreciate it soooo much if someone can open their slim, or someone who's slim is already open, to measure it. it would probably be the nicest thing someone I never knew would do for me  :cry2:. I would praise anyone who would do this favor for me.

Offline yolk

  • Chief squatting Hard
  • *
  • Posts: 22
  • Post quality +0/-0
Re: Soldering accident
« Reply #6 on: September 27, 2008, 12:21:21 PM »
GRRRR. I found out today that the psp works, just not the umd drive..... HELP ME!

Offline gx4702

  • Motor Mouth
  • *
  • Posts: 84
  • Post quality +1/-0
Re: Soldering accident
« Reply #7 on: September 27, 2008, 01:11:56 PM »
Well first, why on EARTH are you ever soldering there?!

i soldered there before...i was too lazy to solder onto the wlan switch directly so...yea...
it works perfectly fine..it powered 4 leds which was controled by the wlan......yea (its the wlan forward voltage thingy)

Offline yolk

  • Chief squatting Hard
  • *
  • Posts: 22
  • Post quality +0/-0
Re: Soldering accident
« Reply #8 on: September 28, 2008, 05:51:23 AM »
cant anyone help a poor fellow? I need to know what I messed up on, and how. I noticed that the psp works, but the umd drive doesn't. The drive powers up, tries to read the umd, and then the laser slowly dims out

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: Soldering accident
« Reply #9 on: September 28, 2008, 12:44:21 PM »
Maybe the thing u broke off was for powering the UMD laser?

Offline yolk

  • Chief squatting Hard
  • *
  • Posts: 22
  • Post quality +0/-0
Re: Soldering accident
« Reply #10 on: September 28, 2008, 04:21:38 PM »
it has to have something related to that. the umd gets power but slowly loses it... PLEASE SOMEONE FIGURE OUT THE EXACT PART! this isnt even my psp, and I would be devastated to have to give my friend a broken psp.

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: Soldering accident
« Reply #11 on: September 28, 2008, 04:23:55 PM »
it has to have something related to that. the umd gets power but slowly loses it... PLEASE SOMEONE FIGURE OUT THE EXACT PART! this isnt even my psp, and I would be devastated to have to give my friend a broken psp.

Well, you should have know what you where doing before you took jobs modding psp.

Offline crashman2k7

  • Who Farted ???
  • *
  • Posts: 206
  • Post quality +0/-0
  • Gender: Male
Re: Soldering accident
« Reply #12 on: September 29, 2008, 12:35:19 AM »
tsk tsk
need a new mobo =) lol pm me if u do 70$ plus ship 10 so 80$ including shipped

Offline LaCozTe-2028

  • BANNED
  • E = MC²
  • *
  • Posts: 353
  • Post quality +0/-0
  • Gender: Male
  • I love My Lacoste shirts
Re: Soldering accident
« Reply #13 on: September 29, 2008, 03:28:24 PM »
lol crashman just tell your friend his umd didnt work or dont tell him anything p.s. crashman i live in canada 2 lol only modder in my school when i take my psp to school everyone's like wtffff

try droping it again
my retared friend fixed by droping it
 1Sniper- not to be an :censored: but, its special friend

Offline yolk

  • Chief squatting Hard
  • *
  • Posts: 22
  • Post quality +0/-0
Re: Soldering accident
« Reply #14 on: October 10, 2008, 01:26:16 PM »
I know this thread may be dead, but im still stumped. Does anyone have their psp open, and is willing to take a picture of the capacitor for me? would a picture be enough for someone to identify it, or will someone have to measure the capacity?

Offline RampageAOT

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • King of mods
Re: Soldering accident
« Reply #15 on: October 24, 2008, 11:50:13 AM »
If you were a newbie at soldering or putting stuff in a psp why would you even do it on a friends psp. At least do it on your own psp instead of your friends come on. I advise you go to afterdawn and sign up as well since they have modders to. Tell me how it goes. GOOD LUCK!
Mac G5
iMac 20"
Toshiba Laptop (2Gb Ram, 250Gb Hdd, Intel Pentium 4, ATI graphics card and WinXP) 
iPhone 1st Gen. (2g)
iPhone 2nd Gen. (3g) PS3 80Gb Xbox 360 Elite (planning on acrylic window and LED bars) PS2 (18" fan and 10" blue cold cathode light) PSP (planning on LED and UMD door mod)

Offline TaSlAyEr

  • E = MC²
  • *
  • Posts: 342
  • Post quality +0/-0
  • Gender: Male
  • i has a shovel lolz
Re: Soldering accident
« Reply #16 on: October 24, 2008, 12:38:51 PM »
just gut the drive and add CFW problem solved

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal