Author Topic: Powerboard led points confusion  (Read 2099 times)

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Powerboard led points confusion
« on: December 13, 2008, 11:03:07 PM »
Hey guys, I just realised that there are two powerboard pinouts in the tut section, but both shows different points. One shows that the positive is closest to the zif connector, the other says that the positive is farthest from the zif connector. Look:






« Last Edit: December 13, 2008, 11:06:08 PM by bustinthejustin »

Sig by Kenshinffx - Thanks!

Offline DarkShot

  • I approve your mom
  • Acid Modder
  • *
  • Posts: 781
  • Post quality +0/-0
  • Gender: Male
  • ÜBERRAPESKILLETS
Re: Powerboard led points confusion
« Reply #1 on: December 14, 2008, 12:29:14 AM »
I used 4dp's pinout and had no issue.

Thats the one you aught to follow.

Offline 123sample

  • Registered BST
  • Who Farted ???
  • *
  • Posts: 231
  • Post quality +1/-0
Re: Powerboard led points confusion
« Reply #2 on: December 14, 2008, 01:03:27 AM »
all of them are correct, I had a problem before because I did some short circuit,

make sure you did it correctly, and double check..

should be fine..

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Powerboard led points confusion
« Reply #3 on: December 14, 2008, 04:13:42 PM »
all of them are correct, I had a problem before because I did some short circuit,

make sure you did it correctly, and double check..

should be fine..


They can't both be correct... But thanks Dark.

Sig by Kenshinffx - Thanks!

Offline 123sample

  • Registered BST
  • Who Farted ???
  • *
  • Posts: 231
  • Post quality +1/-0
Re: Powerboard led points confusion
« Reply #4 on: December 15, 2008, 03:57:58 AM »
Just use 4dp..

reliable..

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal