Author Topic: stuck on the staxx (Read 1615 times)

ramayanalang · « **on:** December 16, 2008, 06:18:49 AM »

anyone know where i can get a screw that would unscrew my top two screws??? (it's a staxx one )
or does a normal X screw good enough???
also why it it bad to use a magnetized screw????

Jumbo · « **Reply #1 on:** December 16, 2008, 01:01:29 PM »

http://www.dealextreme.com/details.dx/sku.12316
This is what you need,

IDK You might be able to get away with a thin flat head but don't try to hard because you could strip it.

kink192 · « **Reply #2 on:** December 16, 2008, 03:46:20 PM »

magnetized screw driver could erase memory or screw up some of the components inside the slim.

ramayanalang · « **Reply #3 on:** January 09, 2009, 12:01:09 AM »

what size is it??

PhenomenalDesigns · « **Reply #4 on:** January 09, 2009, 12:09:19 PM »

Quote from: kink192 on December 16, 2008, 03:46:20 PM

magnetized screw driver could erase memory or screw up some of the components inside the slim.

My expensive set are magnetic, I use em for everything, nothing happened to my PSP's

Although then agian they are just about strong enough to lift screws, nothing else heavier

ra1n · « **Reply #5 on:** January 10, 2009, 12:44:02 PM »

my magnetized screwdriver lost it's magnetism, never realized how much easier it was before...

tonycjr23 · « **Reply #6 on:** January 12, 2009, 10:03:17 AM »

quick tip for all you guys to remagnetize your tools just take a magnet and swipe it one way a few time along your screwdrivers and boom Magnets back just dont go both ways it cancels it out