Author Topic: stripped screw.....  (Read 1093 times)

Offline Angelsniper

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
stripped screw.....
« on: March 14, 2009, 05:27:30 PM »
OK so i bought myself a clear faceplate and during the process i stripped one of the screws. Its the one on the bottom by the serial number. Its stuck in the actual psp itself, i can take off the original faceplate and its still there. Does any one know a remedy for this?

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: stripped screw.....
« Reply #1 on: March 14, 2009, 05:29:22 PM »
Drill the top of it till it break off. Then use pliers to remove the rest of the screw.

Offline Angelsniper

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: stripped screw.....
« Reply #2 on: March 14, 2009, 05:30:12 PM »
What drillbit is it?

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: stripped screw.....
« Reply #3 on: March 14, 2009, 05:30:59 PM »
What drillbit is it?
I forgot which one but something a little bigger than the + on the screw.

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: stripped screw.....
« Reply #4 on: March 14, 2009, 05:36:47 PM »
You really only have 2 options, try the ol' superglue on the screwdriver tip trick or drill out the screw with a drill press (recommended) or use a dremmel NOT a regular drill. Just use the smallest drill bit you can find it SHOULD be the same width as the diameter of the screw part of the screw. Just take another screw out to find the diameter.

Offline krazyone2006

  • PoM PuFFs??
  • Registered BST
  • Granny Spanker
  • *
  • Posts: 385
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: stripped screw.....
« Reply #5 on: March 14, 2009, 07:25:17 PM »
just make sure you got nail polish remover with acitone in it to disolve the super glue on the screwdriver if you go the old superglue on the tip of the screwdriver route works for me 99% of the time

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal