« previous next »
Pages: [1]   Go Down

Author Topic: Does this point supply voltage when the psp is off?  (Read 1483 times)

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Does this point supply voltage when the psp is off?
« on: January 25, 2009, 10:20:19 AM »



Just wondering because the fader deluxe confuses me - not so much how to do it, but WHY it's done that way.
Logged

Sig by Kenshinffx - Thanks!

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: Does this point supply voltage when the psp is off?
« Reply #1 on: January 25, 2009, 12:58:24 PM »
No that point does not supply voltage when the PSP is off. I believe you have to wire the fader to the battery so it can fade while the PSP is off.
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Does this point supply voltage when the psp is off?
« Reply #2 on: January 25, 2009, 01:33:52 PM »
okay thanks :)
Logged

Sig by Kenshinffx - Thanks!

Offline dizzy_chicken

  • Chief squatting Hard
  • *
  • Posts: 23
  • Post quality +0/-0
  • Gender: Male
Re: Does this point supply voltage when the psp is off?
« Reply #3 on: May 07, 2009, 06:40:51 AM »
wiring to the power board allows power to the leds trust me i know i did it unintentionally, but it does look nice when its off. the sites are at the holes (on a phat board) the 2 holes near the indented bit (where the back cover clips onto the board) are +. All the other holes are negative on the pwer board.
Logged

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Does this point supply voltage when the psp is off?
« Reply #4 on: May 07, 2009, 12:01:23 PM »
you can wire the positive to that point. Then us a un-switched ground, like the ground plane on the pobo.
Logged
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: Does this point supply voltage when the psp is off?
« Reply #5 on: May 07, 2009, 06:10:09 PM »
Yeah I just checked on the slim, if the battery in I get a voltage reading as long as the battery is in, I have no idea if this is different for phat. I would just add a simple 3 pin slide to it.

Hey sorry for a BIT off topic, but I checked on the slim with a multi meter on those gold pads, with the + stick from the analog multi-meter to the positive 5v and the -to the gold pads, I got a reading of about 5.2 volts. But then I just touched the - to lots of other random resistors etc and still got a reading so I'm confused...
Logged

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Does this point supply voltage when the psp is off?
« Reply #6 on: May 07, 2009, 09:39:53 PM »
thats why you use a switched ground, such as the power led line. Or use wifi ect.
Logged
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal