Author Topic: gogovn2000's PSP Worklog (Read 4126 times)

RoBot1ks · « **on:** July 02, 2009, 05:03:20 PM »

Hey guys I have most of the parts already here but am waiting on a few other parts.

This is what I'm doing:
Photofast 5400 and speaker with 10 blue sound reactive leds around it
dual nub w/razer x board (Keeping the powerboard)
white case with blue clear buttons and 4 white leds under each button pads
blue sound reactive leds L/R trigger
power/hold button blue led
memory/wifi button white led
usb charge mod

I am keeping the powerboard and I am not soldering wires to the zif connector. I will release the information behind that as I go along

Here are the first pictures for what I've done today:

For the powerboard, I took my dremel and cut off parts of each end. I tested it and it works flawlessly.

Here's the nub with the razorX connected to the bottom:

I cut out the hole and painted over the "hold" text on the faceplate. I still have to brush up on the paint a bit

EliteGamer83 · « **Reply #1 on:** July 02, 2009, 08:53:21 PM »

Woah! how did you get the dual analog to look like that, or maybe it always looks like that an I just never noticed haha..

Could you take pics on how to put that together??

RoBot1ks · « **Reply #2 on:** July 02, 2009, 09:29:19 PM »

Quote from: EliteGamer83 on July 02, 2009, 08:53:21 PM

Woah! how did you get the dual analog to look like that, or maybe it always looks like that an I just never noticed haha..

Could you take pics on how to put that together??

lol
It's just a regular phat analog I just dremelled it down to a circular piece. I will show you what it looks like apart

Ghost1988102 · « **Reply #3 on:** July 03, 2009, 06:58:49 AM »

hmmm, how did you mod dual nub without removing the powerboard?

RoBot1ks · « **Reply #4 on:** July 03, 2009, 07:09:19 AM »

Quote from: Ghost1988102 on July 03, 2009, 06:58:49 AM

hmmm, how did you mod dual nub without removing the powerboard?

I'm still working on the dremel work on the case. As soon as I get that done and get the powerboard and nub placed I will take some pics on how I did it.

BIMPtacular · « **Reply #5 on:** July 03, 2009, 08:27:23 AM »

That is awesome, I want to dual nub my psp so bad I can taste it.

RoBot1ks · « **Reply #6 on:** July 03, 2009, 08:30:54 AM »

You should dude

ghostshadow · « **Reply #7 on:** July 03, 2009, 09:12:12 PM »

Edit: oops. Sorry about the large quote.

That hole is very clean. I'm digging it so far.

Sanctus · « **Reply #8 on:** July 04, 2009, 03:11:02 AM »

Nice man. Good luck! Btw with the hold text how you painted over it, couldn't you just use turps or something similar and just get a cloth and dip it into the turps and then rub it over the text until it comes off? The text is just paint/ink I'm pretty sure.

RoBot1ks · « **Reply #9 on:** July 04, 2009, 06:59:41 AM »

Turps?

At first I tried bleach but then i took a q-tip and spray painted the end then wiped it on there

bustinthejustin · « **Reply #10 on:** July 04, 2009, 01:01:34 PM »

I think he means turpentine. I'm pretty sure turpentine can be used as a solvent to take off paint, so it should be able to take ink off too.

RoBot1ks · « **Reply #11 on:** July 04, 2009, 02:08:12 PM »

Oh ok. Thx guys

XeoBllaze · « **Reply #12 on:** July 12, 2009, 05:41:15 AM »

WOW, she is looking quite snazzy there RoBot1ks. Good endeavor and God bless you bro!

atomicareprise · « **Reply #13 on:** July 12, 2009, 06:27:39 AM »

i'm intrigue with this mod..keep us posted..

good luck buddy..

RoBot1ks · « **Reply #14 on:** July 13, 2009, 08:10:43 AM »

Quote from: XeoBllaze on July 12, 2009, 05:41:15 AM

WOW, she is looking quite snazzy there RoBot1ks. Good endeavor and God bless you bro!

Quote from: atomicareprise on July 12, 2009, 06:27:39 AM

i'm intrigue with this mod..keep us posted..

good luck buddy..

Thanks guys. Sorry for the hold up. Hong kong's shipping is the worst

ApheX · « **Reply #15 on:** July 13, 2009, 12:37:29 PM »

Quote from: RoBot1ks on July 13, 2009, 08:10:43 AM

Thanks guys. Sorry for the hold up. Hong kong's shipping is the worst

lol, You've gotta love hong kong shipping. I'm looking forward to seeing that Razor mod working.

RoBot1ks · « **Reply #16 on:** July 13, 2009, 12:57:19 PM »

Yeah it's so fast eh?

I just can't wait to get it done and posted.

atomicareprise · « **Reply #17 on:** July 27, 2009, 03:12:46 AM »

any updates buddy?

RoBot1ks · « **Reply #18 on:** July 27, 2009, 11:21:14 AM »

Not yet man. This is definately the last time I'm ever buying from focalprice.
I may have to go last resort and see if anybody has some buttons here if they don't come today or tomorrow.

atomicareprise · « **Reply #19 on:** July 30, 2009, 01:06:08 AM »

good luck buddy..

RoBot1ks · « **Reply #20 on:** July 30, 2009, 01:31:15 PM »

Hell yea
They came today.

Let the modding continue

atomicareprise · « **Reply #21 on:** July 30, 2009, 09:32:36 PM »

can't wait...

News:

Author Topic: gogovn2000's PSP Worklog (Read 4126 times)