My frist mods witch ones should i do

[itlahic]

i want to do some mods to my psp but i dont want to brake it
im geting a free psp off of lockerz if its real
with that psp im going to try tp put leds in
if any one has any easy mods i can do plz tell me
im nooby

[jrfhoutx]

LEDs are the easiest mod to start with. start there and practice, practice, practice before you move on...

[laxboy]

leds are the starting however there are diffrent types make sure that your  able to solder to leds. 5mm are easy, smd are a little bit harder but not by much just do to there size

[ApheX]

Start off with a simple led mod like fitting leds to the triggers and move on from there. You could also try the speaker mod or UMD led mod next.

[Sanctus]

Wow you actually managed to get something off of lockerz?! I'll be interested to see if you actually get the product. As for what mods you should do. I agree with all of the above. led mods are relatively easy and a good introduction into the modding scene. Just make sure you are comfortable with soldering before you begin actually soldering to the psp. Be careful and good luck!

[loboplayero]

hey man waz up im a newbe too my first mod was installing led on the l and r buttons ,man that was hard i broke like 10 led they are very small if you need help try this (tools )
000 Phillips Screw Driver
Low wattage (15-20) Quality Solder Iron or variable temperature Solder Station.
X-Acto or other blade for stripping/scratching off the insulation on the wire
Small Tweezers
5/64 Drill bit and drill


Supplies-
30AWG Magnet Wire (enamel coated) (NOT 30AWG Kynar)
0603 SMD LED's
10 Ohm Resistor for 4 blue
this is going to take sometime good luck!!

[PheN0m37]

Try adding an extra speaker in the UMD bay. That requires minimal soldering and is pretty easy. LEDs in the shoulder button are also relatively easy but you should practice soldering first.