original microsoft xbox 360 controller

[rondegro]

Hi i want to know how to prepare a rapid fire controller. I  have prepared some controllers but i dont know how to do in the original. I folowed the tutorials but they didnt worked at all.

[laxboy]

Hi first off welcome to the site. Now it could deffinitly help us if you provided what type of rapid fire  are going to be instaling. Secound if you cold supply us with the tutorials that you used it would be easier to help.

[StoopidMunkee]

and what model your controllers are aswell that is also a big factor

[rondegro]

First Thank you for the answers

I found a youtube tutorial about making a rapid fire controller only using a push button and some cables. I did that for some type of controllers that the persons have bought from other supplier. They have worked very well . I tried the same procedure with the one came with an xbox 360 an it doesn't worked.  Please let me know where to find the model number of the controller for you.  I have connected one cable to diode 1 and the other at the center pin of firing pushbutton. As i told you before this worked for the other controllers.

[laxboy]

the reason that worked is because it was on a matrix controller. Now most controller's are CG