Hold mod led

[nickxab]

Well i don't know if already posted here or somewhere else but i will post it.
I found it when i "played" with my "Frankenstein" psp. 
You bored to see the yellow plastic when you hold your psp ?
Do you want a cool led in the yellow plastic's case while you hold your psp ?
Then just solder two cables in the places that arrows shows.



Here is a video that i found which it seems that someone already done this so you can see how it looks: x4 psp hold led indicator

I am waiting your feedback.

Enjoy it

[Crumbz]

i think that is cool. but ireally dont see lots of ppl making that mod. but good job on adding it.

[TwisTtheTwiTcH]

I was actually thinking the exact opposite, I would probably have this mod as long as it is still off when the psp is shutdown. I've seen times when the power led stays on when the psp is off. That would suck, but other than that, I'd do it.

-TwisT

[nickxab]

Thanks guys ^^
The led stays on if you solder it in wrong place. 
I did it once and it was always on. 

[maniacse]

little bright, but nice work. maybe i do the same, but with white... all led will be white on my white psp.. 

[Modded Matt]

LOL Acidmod users have been using the hold and wifi switch for years. although you left out one of the most important parts. to safely do this you must cut the trace leading to the bottom pin of your switch. here is a diagram using the lm386, but the principal is the same. you are using the bottom pin to ground your circut.

https://www.acidmods.com/forum/index.php/topic,28600.0.html

[maniacse]

matt, but when u cut the "path" u cut hold function too, am i right?? and only thing remain will be the led glowing..

[Modded Matt]

ASPIN:

If you dont cut the trace, you probably wont have to worry about it for long. if you leave the switch centered too long that sucker may burn up, as your dumping additional voltage into the system.