Author Topic: Mod Off Entry 14542349 - xbox 360 (Read 8043 times)

robin1989 · « **on:** February 01, 2011, 10:18:27 AM »

this is the Entry for Entrant 14542349

Email Admin@acidmods.com To Have Updates Posted with the Subject Mod Off Update - (update Number) - 14542349

robin1989 · « **Reply #1 on:** February 02, 2011, 04:28:56 AM »

heres my stock 360 elite ill be modding. warranty sticker intact, it will be dealt with shortly..

robin1989 · « **Reply #2 on:** February 06, 2011, 04:54:38 AM »

I etched this PCB today

Ta da!

ill be using this board to manage all the fans and LED's. this way if i want to change out a fan or set of LEDs i just unplug them and switch them over.
the headers im using are apparently UV reactive, so they glow when under a UV light, we will see how that turns out.
the AM logo is part of the 12v line, ill have LED's behind the board shining through so its visible.

almost forgot the all important number!

still waiting on parts, so thats all for a few days.

Phantom · « **Reply #3 on:** February 08, 2011, 11:38:04 PM »

So the PCB is pretty much finished, it took me a while to crimp all the wires using pliers. all i have to do is wire it to the 360 mobo and add LED's

i cut out the front section of the metal cage, you will see why down the track.

alot of sparks later

might update this some more tonight.

Phantom · « **Reply #4 on:** February 15, 2011, 08:18:43 PM »

little update on my progress so far

first of all im going to ditch that ugly PCB in the post above, it looks horrible and it dosnt really fit where i want it to. so ill redesign it later on.

Here's some pics of removing the memory card ports, these things are a

to get off the mobo. I had no luck in trying to desolder them, the solder just wouldnt melt. brute force took care of it.

the ports are now trash.

i slipped with the screwdriver and this came flying off.

im not sure if it would even be needed without the ports in use, but i thought id show off the iphones camera

The ports are 3.3v USB so im considering hooking up a usb drive to the pins, and have extra internal storage.

so now the ports are out of the way, there is room to fit the next part of my project.

I have a few ideas for the case, but i want to get all the internal stuff done first. im waiting on a USB hub so i can continue, so thats all for now.

Phantom · « **Reply #5 on:** March 09, 2011, 07:52:49 PM »

still waiting on the usb hub and a bunch of other stuff, typical dealextreme. so while i wait, im starting to cut my design into the case.

i got alot of sanding to do.

FOOKz™ · « **Reply #6 on:** March 09, 2011, 08:09:32 PM »

Enjoy logistics.

I bet the case will look crisp after the sanding you have to do.

Phantom · « **Reply #7 on:** March 10, 2011, 08:32:10 PM »

A new mod!

I did this on a spare faceplate i had, just to see if it will all fit, and get an idea of what its going to look like, none of the fans are mounted in yet.

still deciding on what to do with the ROL. i might put a player LED in each fan, it would give it a good effect on startup.

yep it looks terrible i know, its just to get an idea of how it will fit. Im going to fill in the memorycard ports before i drill the holes on the next one, so its just 3 clean holes without the gaps in between.

Those 3 little 5v fans push alot of air, its going to lower the temp of the gpu a fair bit.

And ive designed another pcb so ill etch that later in the week.

Aaaand thats all. peace.

Phantom · « **Reply #8 on:** March 17, 2011, 11:28:32 PM »

Im still not finished sanding, but here is the case so far...

also my usb hub arrived today, so i can get started on the wifi adapter.

let me know what you guys think!

DARk_ANGEL · « **Reply #9 on:** March 23, 2011, 06:40:34 PM »

looks good just keep sanding.

Phantom · « **Reply #10 on:** March 24, 2011, 07:22:50 AM »

little update

well i was going to wire up the wifi adapter internally, or so i thought.

I made an attempt at removing the tiny bicolour led, and ended up destroying a smt resistor/something above it, obviously it was important as the wifi adapter no longer works.

so.

Im still going to wire up everything as i would, so when i get around to buying another wireless adapter (probably after the mod off) i can just swap out the dead one. the actual board from the adapter is connected by miniUSB so its just a matter of swapping them, no soldering.

and these are the PCB's for the fans and LED's

I still have lots to do, so im hopeful ill get this finished in time!

peace.

FOOKz™ · « **Reply #11 on:** March 24, 2011, 02:53:53 PM »

nice cat.

can you take a close up pic of the broken motherboard of the wifi adapter because that can be an easy trip to radioshack to fix.

Phantom · « **Reply #12 on:** March 24, 2011, 07:51:55 PM »

im not sure if it would be an easy fix, the parts didnt have any markings on them so i wouldnt know the rating.

heres some pics i took before hand, the 3 parts in the square would need to be replaced.

Phantom · « **Reply #13 on:** March 26, 2011, 06:31:48 AM »

first cuts before sanding

im thinking white case, with blue lighting behind the 'circuit' designs.

its getting there! let me know what you guys think of it so far

Phantom · « **Reply #14 on:** March 27, 2011, 08:27:32 PM »

I got a new phone so excuse the :censored:ty photos

Here is the faceplate so far

The bog didn't hold while i was drilling that last hole, so ill fix it up tonight

Ive finished sanding the case, all i have to do now is paint it.

Phantom · « **Reply #15 on:** March 31, 2011, 07:06:38 AM »

Nearly finished up the faceplate, just needs to be painted and have the fans mounted in

heres the wires extending the ROL.

i was trying to add another LED to the player1 LED and somehow ended up inverting all the colours to red? thought it had RROD when I turned it on...

and heres the stock HDD and drive

i have the day off tomorow so i should get plenty done.

peace

FOOKz™ · « **Reply #16 on:** March 31, 2011, 01:28:36 PM »

Are you reworking your RAM chips from the back of the motherboard because i noticed they were missing.

Phantom · « **Reply #17 on:** March 31, 2011, 09:48:36 PM »

nope, its a jasper with the ram underneath removed, and the ram on top of the board doubled in size. apparently they did this with some of the falcon boards too, trying to prevent ram issues i guess

Phantom · « **Reply #18 on:** April 01, 2011, 03:06:09 AM »

quick update

im going to try and flush mount the acrylic into the cut

switches for 25mm fans, LEDs, wifi, 60mm fan

Phantom · « **Reply #19 on:** April 03, 2011, 03:59:39 AM »

ok so i painted everything this morning, ill be working on it tonight to try get this finished by tomorow, i have to mount all the fans to the faceplate, wire up all the LED's and switches. it too late atm to start cutting things with the jigsaw so ill cut out the acrylic tomorow morning.

robin1989 · « **Reply #20 on:** April 03, 2011, 04:31:48 AM »

Only 19 hours left

Phantom · « **Reply #21 on:** April 03, 2011, 07:32:34 AM »

everything painted

I flush mounted the acrylic into the HDD, I think it turned out pretty nice.

faceplate fans

Still have to paint the dvd drive, do all the LED's, cut the acrylic for the case windows, then assemble it back together.

Im not going to bother rushing to finish this, i dont want to quickly throw together a piece of junk just to enter it in time, id rather have a quality unfinished project that i can complete later on. if i do finish it, thats a bonus.

back to work!

peace

techninjadude · « **Reply #22 on:** April 03, 2011, 09:36:56 AM »

Take the Fan Stickers off and paint it like the case.

Nice job, I would buy that.

Anonamous · « **Reply #23 on:** April 03, 2011, 09:39:29 AM »

When your all done with it and everything, if you could get the cpu and gpu heat ratings on the console after its done I would greatly appreciate it. I would love to see how much it may help with the cooling.

techninjadude · « **Reply #24 on:** April 03, 2011, 12:20:47 PM »

Yeah it kinda needs a Side, fan, for a efficient fan system.

Phantom · « **Reply #25 on:** April 03, 2011, 07:35:49 PM »

cheers guys, i will take before and after measurements of the temps. this is still nowhere near finished, i painted the dvd drive today, but i have work in an hour.

good luck to all the other entrants!

News:

Author Topic: Mod Off Entry 14542349 - xbox 360 (Read 8043 times)

techninjadude

techninjadude