Author Topic: Mod Off Entry 44730173 (Read 11918 times)

robin1989 · « **on:** February 06, 2011, 05:08:49 AM »

this is the Entry for Entrant 44730173

Email Admin@acidmods.com To Have Updates Posted with the Subject Mod Off Update - (update Number) - 44730173

crashmasher · « **Reply #1 on:** February 08, 2011, 06:05:17 PM »

Parts for mod ordered, but still looking for a replacement case for my system so i can tear it apart

crashmasher · « **Reply #2 on:** February 16, 2011, 05:38:14 PM »

Just some pictures before the modding begins

crashmasher · « **Reply #3 on:** March 02, 2011, 07:08:46 PM »

It appears that i have blown a chip on the underside of my motherboard. After research i have found that it controls the bd drive voltages and without it, no working bd drive. This seems to have put me out of the competition this year unless i find a fix, or enough money to go and buy a new ps3. Pics below but it seems like a lost hope for a fix

Bonz · « **Reply #4 on:** March 02, 2011, 09:47:19 PM »

awwwww... why don't you install CFW on it and remove the drive... then you can do something creative with all the extra space!.. also if youd like read me the numbers off the chip and i'll see if i got one on one of my ylod ps3's i can ship it to you C.O.D. i'd hate to see someone out because of something like this

crashmasher · « **Reply #5 on:** March 03, 2011, 04:15:32 PM »

Yea ive been looking at the cfw but i have 3.55 so ill do some searching, pretty sure their is one. thanks for the offer for the chip but i don't think its something that can be replaced (just by the way its integrated into the board).

crazy-modder · « **Reply #6 on:** March 03, 2011, 04:34:09 PM »

it can be done by desoldering it and soldering a new one on

crashmasher · « **Reply #7 on:** March 03, 2011, 05:26:14 PM »

I realize that this is probably not the best topic for this conversation but i just put it back together and popped in a game, and it worked? from my understanding that chip controls the blue-ray power and i should not be able to do this. If anyone has any info on the chip it would be appreciated. other than that i suppose ill continue working on it (unless it decides to blow my entire ps3 up).

Thanks in advance

Bonz · « **Reply #8 on:** March 03, 2011, 11:39:38 PM »

don't know anything about that chip specifically but as for CFW all of the current working ones are 3.55 so you'd be able to pick any one you'd like

crashmasher · « **Reply #9 on:** March 08, 2011, 05:31:58 PM »

Will be cutting this design into the back of the console, if all goes well i will then light is up green.

FOOKz™ · « **Reply #10 on:** March 08, 2011, 08:20:58 PM »

i dont think that you should carve your mod off number i think you should carve out your legit acid mods name but leave it censored out so people can't see.

Thats gonna look mad sick

Monk3y · « **Reply #11 on:** March 08, 2011, 09:48:55 PM »

Quote from: FOOKz on March 08, 2011, 08:20:58 PM

i dont think that you should carve your mod off number i think you should carve out your legit acid mods name but leave it censored out so people can't see.

Thats gonna look mad sick

Fookz I dont think he plans on cutting out his entry number, pretty sure the number is just there as a verification that the design is his plus they say you need to include your ID number in all your pics. Just a thought though, he may actually want his ID # but I doubt it.

hyper999 · « **Reply #12 on:** March 09, 2011, 05:14:29 AM »

Quote from: FOOKz on March 08, 2011, 08:20:58 PM

i dont think that you should carve your mod off number

LOL

crashmasher · « **Reply #13 on:** March 09, 2011, 08:47:26 PM »

lol no i was not planning on carving my id number

laser etched the back today, looks pretty cool but it seems like the plastic more melted then cut, but i suppose it gives it a more rugged acid feel ,kinda.

Attached is a picture of the finished etch, will probably be posting a video soon of the actual job being done.
Next ill probably be painting a design on the front and back (most likely a green colour). possibly be adding a fan or two

That's the update so far

crazy-modder · « **Reply #14 on:** March 10, 2011, 11:50:54 AM »

wow that looks great, what did you use to cut that?

crashmasher · « **Reply #15 on:** March 10, 2011, 07:41:30 PM »

PS3 PSU gets HOT

crashmasher · « **Reply #16 on:** March 12, 2011, 10:03:25 PM »

Cutting holes for two temp monitors for CPU and GPU

Also received replacement chips for the one that fried, probably solder that tonight

crashmasher · « **Reply #17 on:** March 19, 2011, 11:27:35 AM »

Found some fans and grills laying around and will probably find a way to put them in the power supply

crashmasher · « **Reply #18 on:** March 24, 2011, 12:30:43 PM »

cut holes in psu for fans and lit them up. next will be a paint scheme that i still have to think of

crashmasher · « **Reply #19 on:** March 24, 2011, 12:32:06 PM »

more pics

crashmasher · « **Reply #20 on:** March 24, 2011, 12:32:41 PM »

and more

FOOKz™ · « **Reply #21 on:** March 24, 2011, 12:48:32 PM »

That fan setup you got goin' they're legit. Those fans dont have a duct around it... they probably aren't super powerful.

[HoP] · « **Reply #22 on:** March 25, 2011, 09:05:24 PM »

lol FOOKz, those look like replacement chipset fans. nice i agree.

crashmasher · « **Reply #23 on:** March 29, 2011, 08:35:39 PM »

Spend all day on this, controller and radiation sign

pain in the butt

crashmasher · « **Reply #24 on:** March 29, 2011, 08:36:44 PM »

more pics

FOOKz™ · « **Reply #25 on:** March 29, 2011, 11:01:14 PM »

hahaha thats a lot of soldering. turning out to be pretty sick. watch out for shorts because they might touch something.

crashmasher · « **Reply #26 on:** April 02, 2011, 04:25:57 PM »

Well needed something lit up on the back so i used plexi on the sides to give it a glow, was mainly trying to make the acidmods etch light up from them but it didn't really work. still looks cool tho

my amazing short protection, along with my bundle of joy, haha

FOOKz™ · « **Reply #27 on:** April 02, 2011, 05:02:57 PM »

The engraved etch has to be deeper and scratch up the surface of the cut so the light hits it.

still looks cool. Now i see where the fan is supposed to be.. at first i had no freakin clue what you were going to do with it.

crashmasher · « **Reply #28 on:** April 02, 2011, 09:39:24 PM »

Final modoff video up

http://www.youtube.com/watch?v=COtSqDs6Flg

crashmasher · « **Reply #29 on:** April 03, 2011, 09:50:20 PM »

video of final project proving game play.

http://www.youtube.com/watch?v=9k2EvmxXD5s

here are some final pics

These are my final video and picture entries (including the video above).
good luck to all the other entrants!

News:

Author Topic: Mod Off Entry 44730173 (Read 11918 times)