Author Topic: Dualshock fix...  (Read 2027 times)

Offline Adeo

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Dualshock fix...
« on: April 04, 2011, 08:34:46 AM »
Can you help me fix my ps3 controller? i puted led in tp12 and battery power points. and my ds3 is dead... When I put baterry harder (? my eng....) works but i must push the battery... anyone can help me?

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: Dualshock fix...
« Reply #1 on: April 04, 2011, 08:42:34 AM »
sounds like when you were soldering to the negative battery pin you moved it out of place or perhaps bent it out of place when re-connecting the battery...

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Dualshock fix...
« Reply #2 on: April 04, 2011, 08:42:49 AM »
if it works if you push down on your battery you have taken solder off the battery pins when you soldered the wire to them


and please keep this in the other thread.
come to the rite place if you kiss admins as they promote you to admin.

Offline Adeo

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Dualshock fix...
« Reply #3 on: April 04, 2011, 08:48:50 AM »
I must sold my battery pin.? That sound easy but i wil not doing this... I think i go to enginner... My skills in that are <0 xD

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Dualshock fix...
« Reply #4 on: April 04, 2011, 08:50:35 AM »
its ok some ones got to start some were hope you get it sorted out.
come to the rite place if you kiss admins as they promote you to admin.

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Dualshock fix...
« Reply #5 on: April 18, 2011, 06:42:10 PM »
First remove whatever you did to it and see how it works.

Then make sure you are not missing the small piece of black foam that sits in the bracket that is in the top part of the shell. If it is missing the Daughter board does not make good contact with the main board and none of the buttons will work right.


Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal