« previous next »
Pages: [1]   Go Down

Author Topic: XBOX 360 CONTROLLER WITHOUT P4 LED CONTACTS  (Read 2351 times)

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
XBOX 360 CONTROLLER WITHOUT P4 LED CONTACTS
« on: April 18, 2011, 09:33:01 AM »
Hey guys

Recently I bought a cheap controller wich has a small problem. The guy who sold me told me that the led of the P4 doesnt turn on.

When I have opened it I have seen there isnt led and also there arent contacts. I want to fix it but I am not sure how to do it. I have checked RCD scanboards to see wich traces could I use but like I said before I am not sure what I have to do.

I need help please  :beg:
Logged

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: XBOX 360 CONTROLLER WITHOUT P4 LED CONTACTS
« Reply #1 on: April 18, 2011, 10:01:00 AM »
You need to find the positive and negative traces for the P4 LED, scrape the solder mask (the green stuff) off of them so that the bare copper is visible, and solder jumper wires to the traces and then solder the jumpers to the respective LED points (+ & -). what type of controller board is it, CG1/2, Matrix1/2?
Logged
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: XBOX 360 CONTROLLER WITHOUT P4 LED CONTACTS
« Reply #2 on: April 18, 2011, 10:03:33 AM »
I forgot it its a Matrix 1 controller

These are the points i have to scrape off??



or these:



or are both the same??
« Last Edit: April 18, 2011, 10:22:15 AM by rafaliyo86 »
Logged

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: XBOX 360 CONTROLLER WITHOUT P4 LED CONTACTS
« Reply #3 on: April 18, 2011, 10:35:50 AM »
they're the same, either one will work honestly, I'd start with the ones in the second pic though, as if you cut too deep and cut through the trace, you can keep working your way back along the trace until you get it right...
Logged
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: XBOX 360 CONTROLLER WITHOUT P4 LED CONTACTS
« Reply #4 on: April 18, 2011, 12:06:29 PM »
thanks jr i have already fixed it. Now i have the led working  :tup:
Logged

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: XBOX 360 CONTROLLER WITHOUT P4 LED CONTACTS
« Reply #5 on: April 18, 2011, 12:09:10 PM »
cool, glad you did :)
Logged
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: XBOX 360 CONTROLLER WITHOUT P4 LED CONTACTS
« Reply #6 on: April 19, 2011, 01:00:27 AM »
yes its great, finally i used the first pic (i think it was easier for me). I just want to say this to confirm that works if someone has to do the same
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal