« previous next »
Pages: [1]   Go Down

Author Topic: Help: Lighting up the disc drive  (Read 1075 times)

Offline bozoy

  • Registered BST
  • Ω Allumnist Ω
  • *
  • Posts: 109
  • Post quality +1/-0
  • Gender: Male
  • Baboon Sniffer
Help: Lighting up the disc drive
« on: April 23, 2011, 12:03:39 PM »
hey, so i was wondering if anyone has a nice diagram to show me where some good-old soldering points are for some red leds (3.3v?), on a lite-on drive.
 thanks, bozoy
« Last Edit: April 23, 2011, 12:04:16 PM by bozoy »
Logged
2nd Year EE

Offline Dcofer

  • Ω Allumnist Ω
  • *
  • Posts: 118
  • Post quality +1/-1
  • Gender: Male
  • Acidmods User
Re: Help: Lighting up the disc drive
« Reply #1 on: April 23, 2011, 05:40:15 PM »
I found this on xbox-scene it might be of use, you would want to use the 5v rail and a resistor to get the 3.3v
Here
Logged


Xbox 360 gamertag: EMERGENCY DODO
PS3 gamertag: Emergency_Dodo

Offline Phantom

  • Club AM VIP
  • Granny Spanker
  • *
  • Posts: 355
  • Post quality +11/-1
  • Gender: Male
Re: Help: Lighting up the disc drive
« Reply #2 on: April 23, 2011, 06:04:10 PM »
Quote from: Dcofer on April 23, 2011, 05:40:15 PM
I found this on xbox-scene it might be of use, you would want to use the 5v rail and a resistor to get the 3.3v
Here


thats for the hdd, lighting the dvd drive isnt very common, so you might have a hard time finding diagrams. your best bet would be to poke around with a multimeter.
Logged

Offline Dcofer

  • Ω Allumnist Ω
  • *
  • Posts: 118
  • Post quality +1/-1
  • Gender: Male
  • Acidmods User
Re: Help: Lighting up the disc drive
« Reply #3 on: April 23, 2011, 07:04:23 PM »
haha oops totally read it the wrong way.  well the only real way I could see it is to snag power off the mobo and have them on a disconnect for when you need to take the drive out.
Logged


Xbox 360 gamertag: EMERGENCY DODO
PS3 gamertag: Emergency_Dodo

Offline bozoy

  • Registered BST
  • Ω Allumnist Ω
  • *
  • Posts: 109
  • Post quality +1/-0
  • Gender: Male
  • Baboon Sniffer
Re: Help: Lighting up the disc drive
« Reply #4 on: April 23, 2011, 08:11:03 PM »
yeah, ill borrow a multimeter from school and figure it out while im waiting for some parts, but thanks anyways!
Logged
2nd Year EE

Offline Dcofer

  • Ω Allumnist Ω
  • *
  • Posts: 118
  • Post quality +1/-1
  • Gender: Male
  • Acidmods User
Re: Help: Lighting up the disc drive
« Reply #5 on: April 24, 2011, 12:17:52 PM »
Here is a link in the tut section that has all the mobo power locations by RDC Mobo power and you could possibly use your multimeter and find some power spots on the dvd drive moobo where the sata cable attaches to the board and steal a 5v line directly from there.
Here this has all the connector pinouts, page 9 has the dvd drive sata cable so that would be a good start to start using the meter to check voltages.
Logged


Xbox 360 gamertag: EMERGENCY DODO
PS3 gamertag: Emergency_Dodo

Offline bozoy

  • Registered BST
  • Ω Allumnist Ω
  • *
  • Posts: 109
  • Post quality +1/-0
  • Gender: Male
  • Baboon Sniffer
Re: Help: Lighting up the disc drive
« Reply #6 on: April 26, 2011, 08:51:13 PM »
^^ will do.
Logged
2nd Year EE
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal