Author Topic: drop shot mod, i need help  (Read 2361 times)

Offline manwinder

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
drop shot mod, i need help
« on: June 30, 2011, 09:35:47 PM »
i was making a dropshot mod, i already now that i can solder 2 wires to b, and add a button, but i wanted to make it so that it press b, every time i press rt(or lt), i have tried connecting the b wires  together and connecting them to a on/off switch(not a light swtch),  and having the other wire connected to the middle point on the right side(the point in the middle of the 3 points on the right side of the controller

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: drop shot mod, i need help
« Reply #1 on: July 08, 2011, 09:02:29 AM »
You have a common problem when doing stuff like this, you could either use a double pole switch or you could maybe program a pic to do it for you

B button-switch - resistor - power 
RT middle pin- switch - resistor -power

I use 330 ohm resistors for middle pin

Also I don't think you can use a single pole switch because then B and middle pin would be connect al the time meaning every time u press B it should probably fire.

If you get anywhere tell me

Thanks

Offline manwinder

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: drop shot mod, i need help
« Reply #2 on: July 08, 2011, 09:09:34 AM »
thanks for the help, i am probably going to learn how to program and code a pic and then do it that way

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: drop shot mod, i need help
« Reply #3 on: July 09, 2011, 11:01:07 AM »
Some people talked about using a 555 timer


Offline manwinder

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: drop shot mod, i need help
« Reply #4 on: July 09, 2011, 11:02:43 AM »
so what does a 555 timer do

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: drop shot mod, i need help
« Reply #5 on: July 10, 2011, 10:34:49 AM »
I don't now much on the subject but, its a type of PIC and it's generally used for flashing leds etc...

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: drop shot mod, i need help
« Reply #6 on: July 10, 2011, 02:17:43 PM »
I don't now much on the subject but, its a type of PIC and it's generally used for flashing leds etc...

its not a type of PIC, its a type of IC. Here's some info

http://www.kpsec.freeuk.com/555timer.htm

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: drop shot mod, i need help
« Reply #7 on: July 15, 2011, 01:56:00 PM »
PIC - Programmable Integrated Circuit
IC - Integrated Circuit

Can you not program 555 timers?

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: drop shot mod, i need help
« Reply #8 on: July 15, 2011, 07:21:15 PM »
No, 555 timers are not programmed, you control their operation by the use of external components.

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: drop shot mod, i need help
« Reply #9 on: July 17, 2011, 07:48:57 AM »
As I said I don't know much about them

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal