Author Topic: Xecuter DIY Corona16 CoolRunner – Free Upgrade  (Read 1646 times)

Offline KingMike_OS

  • Shop Owner - Products & Support
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 929
  • Post quality +14/-0
  • Gender: Male
  • R&D
    • Modding Shop At the end of the Universe
Xecuter DIY Corona16 CoolRunner – Free Upgrade
« on: July 06, 2012, 06:02:11 AM »
WARNING: PLEASE BE AWARE THAT THE XC264A BASED RGH HACK FOR THE CORONA IS NOT VERY RELIABLE AND DOES NOT GLITCH VERY FAST AT ALL. THE HACK IS MADE AVAILABLE SO YOU CAN HAVE A PLAY WITH THIS YOURSELF AND SEE WHAT RESULTS YOU CAN ACHIEVE.

THIS IS WHY WE DESIGNED THE COOLRUNNER 3, IT HAS BEEN FINE TUNED USING A MUCH MORE ADVANCED DESIGN AND GLITCHES VERY RELIABLY AND VERY FAST. WE DO NOT OFFER ANY GUARANTEES OR SUPPORT WITH THE XC264A CORONA HACK.
 
To get this working on CoolRunner Rev A B or C you simply have to add a 48.000MHz crystal.
 
If you have Rev A or Rev B remember to remove C15.
 
It's a bit cheap and cheerful and the hack isn't that good with the limitations of the older gen XC264A hardware but here it is anyway.
 
The crystal has to be good quality – not some cheap crappy one as it will not work.
 
These work very well:
 
http://ie.farnell.com/jsp/search/productdetail.jsp?SKU=1640968

Photobucket
48.000MHz crystal wiring to the CoolRunner:
 PIN 1,4 to 3v3
 PIN 2 to GND
 PIN 3 to B
 
We have included 6 files with different timings:
 
tx_corona_0_2.xsvf
 tx_corona_0_3.xsvf
 tx_corona_1_2.xsvf
 tx_corona_1_3.xsvf
 tx_corona_2_2.xsvf
 tx_corona_2_3.xsvf
 
The most important point is the CPU_RST – this will make the difference between a 30 second glitch and a 30 minute glitch.
 
You may want to try using the CPU RESET CLEANER addon that we released – it works very well with RGH1 and RGH2.
 
We also recommend you try the different wire layouts as per the original CoolRunner instructions.
 
CoolRunner 3 is in production right now – you will get to see how Slim glitching should be done

Thanks to GliGli & Tiros for the original RGH exploit.
 
- Team Xecuter
 
On a side note….
 
These are the crappy glitch times you should expect (measured with the CoolRunner 3 RATER)
 
These are cycles – not seconds (1 cycle = 5 seconds). In our opinion it just isn't worth paying for – so we encourage you not to buy a CoolRunner REV C or any other XC642A based glitcher just to do Corona – you will probably be disappointed.
 
11, 51, 14, 5, 5, 26, 19, 1, 1, 13, 18, 3, 1, 3, 4, 6, 8, 5, 5, 9, 3, 2, 7, 22, 14, 4, 6, 5, 1, 2, 16, 2, 5, 17, 8, 10, 8, 8, 9, 4, 13, 2, 9, 4, 19, 2, 8, 2, 10, 11, 1, 14, 1, 2, 10, 4, 3, 3, 3, 1, 3, 20, 4, 4, 6, 15, 7, 3, 18, 3, 6, 6, 1, 2, 3, 11, 2, 37, 3, 13, 1, 10, 9, 4, 10, 6, 3, 14, 2, 4, 4, 4, 6, 4, 2, 1, 6, 1, 9, 3, 4, 2, 8, 2, 5, 15, 3, 3, 1, 2, 6, 7, 6, 21, 15, 27, 11, 9, 4, 10, 2, 5, 11, 3, 6, 14, 26, 8, 2, 5, 4, 3, 11, 3, 15, 4, 10, 13, 14, 22, 22, 9, 6, 22, 19, 1, 5, 10, 5, 1, 7, 2, 16, 9, 1, 11, 2, 7, 24, 3, 8, 12, 8, 7, 12, 13, 4, 7, 3, 1, 17, 9, 2, 5, 3, 2, 5, 1, 16, 4, 9, 9, 3, 1, 1, 15, 18, 3, 7, 3, 49, 18, 9, 6, 4, 1, 2, 11, 1, 3, 1, 5, 14, 12, 16, 11, 1, 8, 11, 1, 47, 8, 1, 19, 2, 18, 9, 6, 7, 15, 12, 13, 6, 16, 5, 3, 11, 3, 12, 2, 5, 2, 11, 4, 1, 18, 8, 13, 8, 10, 8, 1, 1, 13, 10, 5, 38, 10, 20, 3, 8, 4, 7, 4, 17, 3, 6, 1, 8, 13, 2, 3, 2, 10, 1, 1, 30, 17, 7, 14, 24, 10, 1, 16, 11, 16, 5, 6, 6, 11, 6, 1, 15, 1, 3, 5, 25, 10, 7, 5, 13, 12, 6, 8, 5, 7, 1, 46, 2, 17, 14, 2, 2, 6, 3, 3, 2, 5, 23, 3, 1, 8, 23, 15, 5, 1, 3, 3, 3, 1, 2, 5, 10, 9, 9, 20, 7, 22, 1,

More Info And Downloads link Below :

http://www.team-xecuter.com/forums/showthread.php?t=89146
« Last Edit: July 06, 2012, 06:09:46 AM by KingMike_OS »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal